Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    spud's Avatar
    Join Date
    Jul 2006
    Location
    Oceanside, California
    Posts
    1,347
    +1
    2

    XLT Impeller Selection

    I am working on a XLT. It has the 66V engine. The head will be milled to 150 psi and flame arrestors will be installed.

    I would like some feedback on impellers. I am leaning towards a depitched Solas 13/19 Concord. I hear the root angle on the 12/18 is a little on the wimpy side and depitching a 13/19 is better.

    Opinions?


  2. #2
    I have the 13/19 on mine and it is a nice overall... also thinking about selling it bc i might do the 05 pump etc etc..only out like once or twice fresh water. doesnt kill bottom end or run out on top.
    Greg

  3. #3
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    With head milled i would use a 13/19 out of the box.

  4. #4
    spud's Avatar
    Join Date
    Jul 2006
    Location
    Oceanside, California
    Posts
    1,347
    +1
    2
    Thanks. Oceanside Bill has a 13/19 for it. I just wanted to make sure it wouldn't be overpropped.

  5. #5
    spud, if your not going to go the ho pump route, run a nujet in that xlt ( probablly will give you a slight increase of only 2 maybe 3 mph over a 13/19)
    ran those in the xlt's to 70-72 mph when people were scratching their head trying to make their GPR's run that fast

  6. #6
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Spud - I put a 13/19 depitched to 12/18.5 (by Carl @ Island) And I was very impressed. Before the prop it was a 58.1 mph ski then after 60.8 with just the prop change. Acceleration was much improved also.

  7. #7

    Join Date
    Aug 2006
    Location
    Indiana
    Posts
    1,274
    +1
    81
    I have an 04 XLT with milled head, and I'm running the 12/18 concord, with perfect results. I will run 63.2 at 7220, and most days beat my GRP out of the hole.

  8. #8
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    I see VOODOO has a 12/18 in the classifieds

  9. #9

    Join Date
    May 2007
    Posts
    57

    impellar

    Quote Originally Posted by spud View Post
    I am working on a XLT. It has the 66V engine. The head will be milled to 150 psi and flame arrestors will be installed.

    I would like some feedback on impellers. I am leaning towards a depitched Solas 13/19 Concord. I hear the root angle on the 12/18 is a little on the wimpy side and depitching a 13/19 is better.

    Opinions?
    i have a almost new solas 12/18 have paperwork bought it in may 07 todd 954 974-1665 going to a conversion pump

  10. #10
    I wish you woulda told me about some of these goodies before i got my 13/19 carl...
    Greg

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2003 xlt 1200 impeller selection - 13/19 or 12/18
    By mwinschel in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-22-2012, 08:29 PM
  2. Impeller selection
    By agibbs in forum 4-Tec Performance
    Replies: 4
    Last Post: 03-29-2008, 06:39 AM
  3. Impeller selection - stock '01 XLT1200
    By Jolly Roger in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 03-25-2008, 12:44 PM
  4. 99 XLT impeller question
    By hammerdog57 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 01-29-2007, 06:47 AM
  5. 98 gp800 impeller selection for max speed
    By spyder3000gtvr4 in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 09-10-2006, 05:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •