Results 1 to 4 of 4
  1. #1

    How hard is it to remove the supercharger ?

    I hear a "chattering" noise around 4400 RPM's and it either goes away above 5000 RPM's or the sound is drowned out by higher RPM engine noise/wind noise form a higher speed....But anyway....I wanted to konw if anyone has pulled their supercharger and if so how hard was it and what else will I need to remove to get my supercharger out....I want to take a look at the supercharger to see if something has let loose inside it and maybe locate that chattering noise

    This could be why I am only getting 10psi of boost even with R-Rated BOV block off


    Thanks All


  2. #2
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,446
    +1
    650
    its normal from what i have seen and heard mine does it, Turbojimmy's does it,

  3. #3
    Quote Originally Posted by Ultra250 Tn View Post
    its normal from what i have seen and heard mine does it, Turbojimmy's does it,


    Cool thanks !

    Ill just let it go for now and see if it gets worse or anything

    Thanks Again

  4. #4
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,446
    +1
    650
    87 hours and it still sounds the same

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How hard is it to instally a clutch on a Supercharged Yamaha?
    By CARLRRE in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 10-01-2014, 06:47 AM
  2. How hard is it to work on the new 2012 RXP or RXT ?
    By Makesumwake in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 10-02-2013, 06:02 AM
  3. 96 WVT700 wave venture, how hard is it to replace the stator?
    By hd95 in forum Yamaha Old School Skis
    Replies: 0
    Last Post: 09-20-2010, 08:57 AM
  4. how hard is it to split the two hull halfs?
    By mibunkerking in forum 2-Stroke Performance
    Replies: 24
    Last Post: 10-28-2009, 11:32 AM
  5. How Hard Is It To Rebiuld My Engine?
    By jsc7002 in forum Polaris Open Discussion
    Replies: 10
    Last Post: 06-15-2007, 01:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •