Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 42

Thread: ski's done

  1. #1
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536

    ski's done

    Finished my ski, Anyone who has seen my ski is going to say that is not your ski you have an 03. Well my decals were all messed up so i removed them all and ordered all the 04 decals, Like them better than the 03 ones. I want to thank Leo and Ronny for putting on the decals you guys did an awesome job. Took the whole motor apart and had the crank redone and trued and welded, I want to thank Lowell for the time he spent with me on the phone about my crank shaft. I want to thank Fernando for the gas valves, I put new hydro turf mats on the old ones were all messed up. I want to thank everyone who was involved in figuring out the pump pressure relief valve system. I was able to put a 90 degee fitting on both sides of the 2 inch extension and on the nozzle i drilled and tapped were the reverse would bolt on and bolted on straps to hold the valves in place. Next week will take it out and see what it will run.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	JIMS SKI 001.jpg 
Views:	147 
Size:	980.1 KB 
ID:	40279   Click image for larger version. 

Name:	JIMS SKI 002.jpg 
Views:	166 
Size:	1.09 MB 
ID:	40280   Click image for larger version. 

Name:	JIMS SKI 003.jpg 
Views:	144 
Size:	1,000.8 KB 
ID:	40281   Click image for larger version. 

Name:	JIMS SKI 005.jpg 
Views:	88 
Size:	393.4 KB 
ID:	40282   Click image for larger version. 

Name:	JIMS SKI 006.jpg 
Views:	114 
Size:	1.28 MB 
ID:	40283   Click image for larger version. 

Name:	JIMS SKI 007.jpg 
Views:	138 
Size:	1.62 MB 
ID:	40284  



  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    more pictures
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	JIMS SKI 008.jpg 
Views:	56 
Size:	1.01 MB 
ID:	40286   Click image for larger version. 

Name:	JIMS SKI 009.jpg 
Views:	61 
Size:	1.02 MB 
ID:	40287   Click image for larger version. 

Name:	JIMS SKI 010.jpg 
Views:	125 
Size:	788.3 KB 
ID:	40288   Click image for larger version. 

Name:	JIMS SKI 011.jpg 
Views:	103 
Size:	607.1 KB 
ID:	40289   Click image for larger version. 

Name:	JIMS SKI 012.jpg 
Views:	97 
Size:	534.6 KB 
ID:	40290  

  3. #3
    JD 1's Avatar
    Join Date
    Aug 2005
    Location
    St. Louis, MO
    Posts
    4,186
    +1
    90
    looks good jim, looks real good

  4. #4
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by JD 1 View Post
    looks good jim, looks real good
    Thanks Dan, Want to keep it looking as stock as possible.

  5. #5
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Looks great Jim!

  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Very nice Jim! It looks like some two barrel pee shooters pissing at ya??

  7. #7
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    looks nice jim...500+ hours on the same crank

    assuming the T's off the head are dumps to rear of ski,can you explain as this is the first time ive seen it set up like this..

    paul...

  8. #8
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41
    Quote Originally Posted by Hydrotherapy View Post
    looks nice jim...500+ hours on the same crank

    assuming the T's off the head are dumps to rear of ski,can you explain as this is the first time ive seen it set up like this..

    paul...
    hello Paul less water to the pipe, Want the pipe hotter.

  9. #9
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by N8R View Post
    hello Paul less water to the pipe, Want the pipe hotter.
    correct less water and less pressure to the pipe.

  10. #10
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    Quote Originally Posted by jims 1300 View Post
    correct less water and less pressure to the pipe.
    and the pipe dont cook its self from extra heat ??

    is the T fitting inner bore size key to getting right ammount out of ski via dump and rest in the pipe...

    was right behind you with relief valve clamp idea,damn thought i had the patern on that one
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	jet work clamps.jpg 
Views:	49 
Size:	201.9 KB 
ID:	40291  

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dumbest thing I've done on a ski
    By mongo in forum Open Discussion
    Replies: 14
    Last Post: 09-14-2008, 08:39 PM
  2. Dumbest thing I've done on a ski
    By mongo in forum Mudbug Nationals PWC.Life Rally
    Replies: 11
    Last Post: 09-04-2008, 12:32 AM
  3. Stage III sc what needs to be done to run on stock ski?
    By JonnyRXT in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-02-2008, 04:44 PM
  4. Project ski is almost done!! Updated pics = )
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-08-2007, 11:49 PM
  5. Ski's almost done take a look guys
    By mikegpr03 in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 12-27-2006, 07:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •