Thread: UMI bar setup
04-10-2006, 07:43 PM #1
UMI bar setup
I have a set of bars that i am going to be installing this weekend. The bars arent made for the RXP so the instructions are not very clear. Does any one have any tips or do's or don'ts any help would be appreciated.
04-10-2006, 08:31 PM #2
Its alot of work. Just take your time.
You have to cut the opening bigger in one area to be able to mount the UMI base plate. You will see where once you start the process.
04-10-2006, 08:40 PM #3
Thanks for that. I may be posting a little bit when i actualy do the install. What do i need to make this cut?
04-10-2006, 08:41 PM #4
it is fun work!! I used a dremel tool to cut mine, it makes a mess but nothing a shop vac can't fix.
I thought the toughest part was getting the stock system out of the way.
04-10-2006, 08:47 PM #5
04-10-2006, 08:51 PM #6
Fun work I had no idea it was this involved to put these bars on. thought unhook rehook. No biggy it will just take a little longer. they are woth it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By kenshin89 in forum Sea Doo ClassifiedsReplies: 0Last Post: 10-03-2010, 07:35 PM
By Saltwater n Premix in forum Kawasaki PWC Performance (2-stroke)Replies: 1Last Post: 08-31-2010, 04:35 PM
By johnD in forum 4-Tec PerformanceReplies: 10Last Post: 06-26-2006, 11:49 AM
By brad2510 in forum 4-Tec PerformanceReplies: 42Last Post: 02-21-2006, 09:22 PM
By Lurker in forum 4-Tec PerformanceReplies: 34Last Post: 01-11-2006, 10:54 PM