Thread: Rev limiter
10-07-2007, 02:28 PM #1
What is it, where is it and how do I know if I'm hitting it?
10-07-2007, 02:38 PM #2
10-07-2007, 02:42 PM #3
10-07-2007, 02:50 PM #4
8200 and you will be at a solid 8150 without knowing that it's doing 8200+. atleast that was the case for me on my '05..
10-07-2007, 02:54 PM #5
- Join Date
- Oct 2005
I believe the Rev limit is 8200 RPM. I think it was the 2006 and newer models that they raised the Rev limit to 8300 RPM.
Anyways, the purpose of the Rev limiter is to keep the engine from over revving and damaging itself. It is programmed into the ECU which is bolted on top of the intake manifold (for the RXP anyways). You will know if you're hitting it because your RPM will go up and then get knocked back down. Also, your ski will lose some power because the ECU is keeping you from banging off the limiter. Anything above 8100 RPM on a stock 4tec SCIC ECU and you will start to lose HP.
10-07-2007, 02:54 PM #6
What do you mean...8200 and you will be at a solid 8150 without knowing that it's doing 8200+.
10-07-2007, 04:13 PM #7
the rev limit is 8200.
when I was over the limit (around 150 rpms over) my tach still said 8150.
hope that makes more sense
10-07-2007, 04:32 PM #8
You Can Hear It When You Are Rinsing Or Flushing The Ski...when You Hit It To Clear It Out And It Goes Da Da Da Dat At The Top Of The Revs That Is The Ski Bouncing Off The Rev Limiter ... You Dont Need To Rev It That High But Even Though I Am Not Trying To I Hit It Sometimes....
10-07-2007, 04:38 PM #9
10-07-2007, 04:45 PM #10
Lmao Ok Smart A What Does It Sound Like To You > If You Think You Can Do Better Do Da
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By majundecid in forum 4-Tec PerformanceReplies: 1Last Post: 07-10-2006, 04:31 PM
By meirvin in forum 4-Tec PerformanceReplies: 12Last Post: 03-07-2006, 12:32 PM
By Sirhc7897 in forum 4-Tec PerformanceReplies: 6Last Post: 02-03-2006, 07:26 PM
By Mark S in forum 4-Tec PerformanceReplies: 1Last Post: 09-03-2005, 10:48 PM
By Gforce in forum 4-Tec PerformanceReplies: 11Last Post: 05-29-2005, 01:26 PM