10-07-2007, 10:09 PM #1
stage 2 pos vortec 15/20r low rpm
running a stage 2 with the pos vortec wheel and a 15/20r prop. my ski only spins 7600 to 7700 rpm ...people are saying keep the 15 20 when i install the rude and rotax ecu ...so that leads me to believe that a 15/20 is to steep for a stage 2 hence why the rpm is down??does this sound about right ??? or do i have a problem w my current set up
10-07-2007, 10:43 PM #2
Nevermind i just re read the post and answered my own question
Last edited by ReDevilRXP; 10-07-2007 at 11:03 PM.
10-07-2007, 11:21 PM #3
Yes, you need more power in order to turn the 15/20. Depending on what exit venturn nozzle you are using also determines the max rpm's that you can achieve with that prop.
With the Rude Charger, external IC and a bunch of your usual bolt-on mods, using a 83mm nozzle you should be able to turn that prop 8400+ without much trouble. This is assuming that your boat is dialed in correctly air fuel wise.
10-08-2007, 06:27 AM #4
that is about what i have determined the 15 20 is what riva recomended ...why i am not sure but thanks for the conformation
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RxPrider in forum 4-Tec PerformanceReplies: 0Last Post: 09-12-2006, 09:24 PM
By rxpenpastu in forum Sea Doo Open DiscussionReplies: 1Last Post: 07-21-2006, 02:25 PM
By xenonx in forum 4-Tec PerformanceReplies: 11Last Post: 06-19-2006, 03:19 PM
By sgaaap in forum 4-Tec PerformanceReplies: 15Last Post: 10-01-2005, 10:56 AM
By RXP04 in forum 4-Tec PerformanceReplies: 0Last Post: 07-02-2005, 09:12 PM