Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Help Please!!!!

  1. #1

    Help Please!!!!

    I just put a xs intercooler on. I started up the motor and i didnt have the block off on tight enough...and the motor sounded like it was running high rpms without me even being on the trottle....i put the block off back on tight and now the motor will turn over but it wont start up....does any1 have any ideas of what it could be....maybe a spark plug i hope


  2. #2
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706
    What injectors do you have?

    I recall asking when to go to 42lb injectors and someone said that once i install an external IC. Someone mentioned the ski may not turn over with the external IC and stock injectors. I will look for that thread and put the link up

  3. #3
    I still have the stock injectors on

  4. #4
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706

  5. #5
    i understand maybe i should change the injectors but it started fine the other day and now that the block off came off it wont start

  6. #6
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706
    Anyone experieince this with an external intercooler install?

  7. #7
    Jerry suggested that i disconnect the battery and reset the mpem...and he thinks that should do it...so ill give that a try tomorrow

  8. #8
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    3
    you have a combustion issue. you can't reset an MPEM particularly... nothing in it is writeable or resetable... the MPEM is a fuse block center for 12V power.

    spark, compression, fuel, timing will start a motor.... i'll assume you have compression and timing..... bad gas, not getting fuel, no spark, or fouled spark plugs.

    you smoked the motor lean for a bit there when the block off came off the intake manifold... i'd start with new plugs

  9. #9
    sleeplessnMS's Avatar
    Join Date
    Mar 2006
    Location
    Waveland,MS
    Posts
    1,943
    I agree dissconnect battery ~ may reset see what happens...

  10. #10
    Vern's Avatar
    Join Date
    May 2005
    Location
    Grand Haven, MI
    Posts
    3,594
    +1
    128
    I would look very closely at wiring connections at the front of the motor, and coming in/out of the gas tank ... actually grab them, and push them together, make sure the connections are solid. Sometimes after banging around installing crap in the hull, I have bumped connectors and loosened them, or knocked them off.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need HELP Please!
    By GeoRXT in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-30-2006, 08:04 AM
  2. HEy Guys Need Help PLEASE!!!
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-06-2006, 01:29 AM
  3. RXT 2005 Loose Hose - HELP PLEASE
    By BrAinZ in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-12-2006, 12:28 PM
  4. Can some one Post! A little Help Please!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2005, 07:57 PM
  5. RXP Handling !! Anyone help please
    By rxp_boy in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-17-2005, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •