Thread: Reset button won't reset
10-10-2007, 02:34 PM #1
- Join Date
- Oct 2007
- Warner Robins, Ga Near Macon
Reset button won't reset
I have a 2001 Pro 1200 and out on the water it just died when I started it. The reset button was popped and it wouldn't reset. When I got hole the same thing happened. I couldn't find any loose wires, and although I have a meter that I use for my jeep I'm not the most adept at waverunners. Any help before I take it in would be much appreciated. Thanks,
10-10-2007, 02:57 PM #2
WELCOME to the Green Hulk forums 111.
Check for pinched wires from the stator or look in the tech section and perform the stator tests.
Check for ground at the engine/engine plate.
Take OFF the 12 volt wire leaving the circuit breaker and see if the breaker re-sets at that point.
Last edited by ph2ocraft; 10-11-2007 at 09:01 AM. Reason: Forgot the OFF
10-11-2007, 02:47 AM #3
- Join Date
- Sep 2006
welcome how bout you sell to me ! jk , open the box up , there is free info in the tech section , just stickys everywhere , look under domestic elec.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bruce0429 in forum Polaris Open DiscussionReplies: 3Last Post: 08-13-2010, 10:46 PM
By sjswanner in forum Polaris Open DiscussionReplies: 4Last Post: 06-21-2010, 09:34 PM
By dougberry in forum Polaris Open DiscussionReplies: 1Last Post: 06-25-2009, 10:45 AM
By highpockets in forum Kawasaki PWC Performance (2-stroke)Replies: 8Last Post: 06-23-2009, 11:57 AM
By DarrinMaas in forum Polaris How To & FAQsReplies: 6Last Post: 06-17-2009, 08:30 PM