04-12-2006, 09:27 AM #1
Thought on pump bolts............
I was taking my pump out yesterday, to get it ready to send off to Skat......
I never noticed this before, but I noticed that the venturi has lock washers on it, but there are none on the pump itself......
I am thinking on putting lockwashers on the pump bolts as well........
There should be no issue with doing this right?
04-12-2006, 09:36 AM #2
the pump housing USUALLY should have flat "fender" washers, lock washers, and the 17mm nuts
and the venturi is secured onto pump with the same.. washers, lock wahsers, bolts
04-12-2006, 09:57 AM #3
My pump bolts never had lock washers on them from day one!
I guess the guy on the production line that day ran out of them and said "Oh Well the dealer can fix that"
I will go get some stainless lock washers
04-12-2006, 04:36 PM #4
The RXP's have bolts, and flat washers, the RXT's have the nuts, and lockwashers
04-12-2006, 05:05 PM #5
Originally Posted by psycho rxp
- Join Date
- Oct 2005
GTX SC have flat washer, lock washers and nuts...PR...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 89 burban in forum Yamaha Old School SkisReplies: 2Last Post: 07-14-2007, 09:02 AM
By ugadawg131 in forum Polaris Open DiscussionReplies: 7Last Post: 03-09-2007, 12:30 PM
By bainer1290 in forum Yamaha Old School SkisReplies: 8Last Post: 03-05-2007, 07:11 PM
By polarisman01 in forum Polaris Open DiscussionReplies: 7Last Post: 02-27-2007, 12:10 AM
By scorp in forum Polaris Open DiscussionReplies: 4Last Post: 01-17-2007, 09:56 AM