Thread: Questions about the IC install.
06-03-2005, 09:59 PM #1
Questions about the IC install.
I have the Riva intake installed on my ski. I'm trying to get the stock exhaust thing out and the intake is in the way. Any suggestions??
To take the bolts out to remove the stock IC, where can i get a socket to fit and what size?
Hulk, I've got the instructions from PPG for the install. Do you want a copy to put under your modifications?
06-03-2005, 10:04 PM #2
take the intake out!
The bolts on the stock IC clamp are a Torx E8
06-04-2005, 07:04 AM #3
That appears to be a pain if i take that front bracket off. Is there a problem if i cut the box to get it out?
06-04-2005, 08:04 AM #4
if you are talking about the plastic resonator then yes, by all means cut it to get it out. Take a sawzall and cut the portion of the resonator that the free flow pipe replaces. (the part that looks like a pipe) and then it comes right out.
another trick i'll share with you is to not use the bolts on the front bracket of the power filter. thread a zip tie thru the bolt holes on the front bracket and wrap it around the power tube. That way if you do have to do any work the power tube comes off the supercharger and then will rotate out of your way very easily.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By porksword in forum Open DiscussionReplies: 3Last Post: 03-16-2007, 03:06 AM
By Antiguan FZR in forum 4-Tec PerformanceReplies: 1Last Post: 02-20-2007, 09:18 AM
By RXPED in forum 4-Tec PerformanceReplies: 6Last Post: 10-15-2006, 03:55 PM
By DSquare in forum 4-Tec PerformanceReplies: 4Last Post: 07-03-2006, 03:31 PM
By Teddy57 in forum Sea Doo Open DiscussionReplies: 3Last Post: 01-30-2006, 08:00 PM