Thread: What you guys think??
10-15-2007, 09:02 AM #1
What you guys think??
Hello guys went out yesterday and my rpms and max speed is not there anymore running low 66 and my rpms is 6700 6750 the tempature was very hot yesterday im thinking that could be the problem but found it werid i will be around high 67 with rpm reaching 6850 to 6900 last couple times i had ran.
Just want here your input?
Looking to get riva aftermaket heads 150 psi very soon!
10-15-2007, 09:05 AM #2
Dude, put the stock prop back in that thing before you burn it up. Keep the DF around for when you get the head cut.
EDIT: Do you have a controller? If so, what are the settings?
10-15-2007, 09:30 AM #3
10-15-2007, 09:46 AM #4
10-15-2007, 09:55 AM #5
Ok will look into that....i will be getting the riva heads soon should i change to a 13/19 instead? i think that pitch will do better for me?
10-15-2007, 10:08 AM #6
Why buy another prop, put the stock one back in with the motor stock.
10-15-2007, 10:15 AM #7
I am going through a simular issue with my carbed boat. This is what I would do:
1) Pull the DF prop out and replace it with the stock prop.
2) Get an RPM reading with the stock prop
3) Install the Riva heads
4) Get an RPM reading with the Riva heads and stock prop
5) IF the RPM's are too high with the Riva heads you could put the DF in. I seriously doubt that you will need the DF with heads.
10-15-2007, 10:19 AM #8
I dont have my stock prop it was sold to me with the DF and dont want to go back to a stock impeller....
10-15-2007, 10:25 AM #9
10-15-2007, 10:42 AM #10
you should do things to raise RPMs or you should lower the pitch of the impeller
for example, to raise RPMs
- get more air to the motor
- remove siphon tube from nozzle
- use a GP1200R 87 mm nozzle
- raise compression
- install a GP800R intake grate
- install VForce reeds
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Greg555 in forum 4-Tec PerformanceReplies: 13Last Post: 06-15-2011, 11:20 AM
By madrui in forum Kawasaki PWC Performance (4-stroke)Replies: 24Last Post: 02-20-2011, 05:52 AM
By bksbigboy69 in forum 4-Tec PerformanceReplies: 6Last Post: 11-06-2010, 12:07 PM
By jasonatletitridecustoms in forum Open DiscussionReplies: 6Last Post: 10-27-2009, 09:49 PM
By 05NNJ1300R in forum Yamaha PWC Performance (2-stroke)Replies: 13Last Post: 07-31-2008, 09:53 PM