Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1

    Join Date
    May 2007
    Location
    North Jersey
    Posts
    282

    Green wheel on stock ski?

    What can I expect with a green wheel on a other wise stock ski? Other mods would be a pimp wedge and opas block offs.


  2. #2
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by greasyginzo View Post
    What can I expect with a green wheel on a other wise stock ski? Other mods would be a pimp wedge and opas block offs.


    The wheel will give you some more power, better acceleraton, but you'd need to repitch the prop to get more top end...

    But that pimp wedge, that will get you ALL DA' HONEYS!

  3. #3
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    You would feel much better acceleration and it would improve top RPM's. If you are shy of 8100 R's then you would probably be pegged at 8100 after installing the green wheel.

    If you are already at 8100 then you would want to add a bit of pitch to the trailing edge of your impeller to take advantage of the new power.

  4. #4
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706
    Hold on when you squeeze the throttle for the first time.
    Much better pull out of the hole.
    Top end with the right conditions 1 to 2 MPH more.
    My RXT can pull 68.7 with 62 water temp and 75 air 2 bars on the fuel.. Evreything else is stock for now.

  5. #5

    Join Date
    Jul 2007
    Location
    Montreal Canada
    Posts
    43
    There need to change stock injectors or not ? with the greenwheel

  6. #6
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by tibrin04 View Post
    There need to change stock injectors or not ? with the greenwheel

    no, as long as you still have the OEM IC in there....

  7. #7
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706
    Quote Originally Posted by Danny View Post
    no, as long as you still have the OEM IC in there....
    hate to say this but I have to disagree.

    One of the guys I ski with has an 06 RXT and side by side there is a noticable difference in the low end.
    The upper end well not much there.

    At around 6950 the ski stops pulling and the accelaration curve slows.

    I am talking side by side comparison.

  8. #8

    Join Date
    May 2007
    Location
    North Jersey
    Posts
    282
    Would the green wheel with metal washers be "bullet" proof? Meaning having the green wheel installed I could ride the shit out of it even in the ocean and not worry about the supercharger blowing up?

  9. #9
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706
    yes but you will eventually need to shim it.

    I can't recall what the rebuild time is, I think its 100 hours.

    The rebuild is recommended with our without metal washers

  10. #10
    Matthew K ReDevilRXP's Avatar
    Join Date
    Aug 2006
    Location
    Lemont, IL
    Posts
    2,477
    Quote Originally Posted by bruinsrme View Post
    hate to say this but I have to disagree.

    One of the guys I ski with has an 06 RXT and side by side there is a noticable difference in the low end.
    The upper end well not much there.

    At around 6950 the ski stops pulling and the accelaration curve slows.

    I am talking side by side comparison.
    I dont think this would happen due to Injector size.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. C1 Monster Charger Wheel on stock fuel system
    By ChargedTaco in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 06-25-2010, 06:32 AM
  2. R&D vs JIMS plate on stock ski
    By 007GPR08 in forum Yamaha PWC Performance (2-stroke)
    Replies: 22
    Last Post: 05-30-2010, 05:35 PM
  3. Stage III sc what needs to be done to run on stock ski?
    By JonnyRXT in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-02-2008, 04:44 PM
  4. Aftermarket Prop on Stock Ski
    By greasyginzo in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-30-2008, 01:01 PM
  5. Test Green wheel on stock RXP
    By rxp_boy in forum 4-Tec Performance
    Replies: 1
    Last Post: 10-25-2007, 07:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •