Thread: How much 'play' in SC shaft???
11-02-2007, 11:49 AM #1
How much 'play' in SC shaft???
With my SC complete as it is when I remove it from my ski it has a tiny bit of play if I push the washer end of the shaft towards the impeller end and vice/versa , there is no up and down play.
The play is probably less than 1 mm,
Should there be any play at all, is this amount acceptable?
11-02-2007, 02:37 PM #2
A small amount is normal. I use a dial indicator to check this. If it's .010 or more i would replace the bearings.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By LudjakR1 in forum Yamaha Open DiscussionReplies: 16Last Post: 05-10-2016, 09:15 AM
By sportster in forum Sea Doo Sport BoatsReplies: 0Last Post: 06-05-2007, 01:07 AM
By Ed in forum Sea Doo Open DiscussionReplies: 5Last Post: 06-14-2005, 09:30 PM
By Rendog in forum Sea Doo Open DiscussionReplies: 5Last Post: 06-13-2005, 09:06 AM
By Jeff C in forum Sea Doo Open DiscussionReplies: 7Last Post: 06-01-2005, 09:00 AM