Results 1 to 6 of 6
  1. #1

    Join Date
    Jul 2007
    Location
    Montgomery, AL
    Posts
    257
    +1
    1

    Question Bypass fitting w/ Greenhulk Waterbox

    I am trying to decide weather to use a bypass pisser fitting or just block the line off with a bolt.

    What are the advantages of using a bypass or the disadvantages of not using one?


  2. #2
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    807
    the advantages are it looks cool (preference) and you can monitor water flow.
    disadvantages would be just wondering if the bolt popped loose and is filling your hull with water..

  3. #3
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    do not just bolt the hose... there's more than just looks to the water line route and bypasses.

    you'll be slowing down circulation thru the open loop system which means less water velocity thru the intercooler

    and you'll be forcing ALL water that exits the system to have nowhere to go but thru the j-pipe and into the waterbox which could be choking down rpms if u flood the box

    in otherwords... you are forcing a 3/4" water supply line off the pump to exit the ski ONLY via 3 pin holes in the j-pipe water jacket

    piss the water out someway or another!

  4. #4

    Join Date
    Jul 2007
    Location
    Montgomery, AL
    Posts
    257
    +1
    1
    I was thinking that with a pisser you would get better flow through the IC but without you might get better cooling in the exhaust manifold.

    But since it comes out of the bottom of the exhaust manifold and was routed to the stock exhaust outlet around the stock water box it will be better to use the pisser. Thanks for the help with my logic.

  5. #5
    REID2168's Avatar
    Join Date
    Jun 2007
    Location
    My House
    Posts
    8,156
    +1
    241
    Quote Originally Posted by Shibby1485 View Post
    piss the water out someway or another!

    i use my PEE PEE!!!!!!!!! hahahahahahahahahaha

  6. #6
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    i have lady parts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RXT water bypass fitting connection...
    By GeoRXT in forum 4-Tec Performance
    Replies: 26
    Last Post: 03-04-2008, 01:19 PM
  2. greenhulk waterbox in rxt.
    By Madjamr in forum 4-Tec Performance
    Replies: 29
    Last Post: 10-31-2007, 03:21 PM
  3. Water Bypass Fittings
    By Gj#6 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-29-2007, 10:10 AM
  4. Need four water bypass fittings.
    By ccassone in forum 2-Stroke Performance
    Replies: 2
    Last Post: 08-31-2006, 04:26 PM
  5. wideband O2 sensor bung & water bypass fitting installed
    By rapidacceleration in forum 4-Tec Performance
    Replies: 4
    Last Post: 02-25-2006, 07:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •