Thread: Ok guys make it WORK !!
11-18-2007, 06:11 PM #1
Ok guys make it WORK !!
AAEN V-4 Two Stroke Racing Engine Aaen V-4 Two Stroke Racing Engine Weight Width Length Height 95 Lbs. 18" 16" 14" 44 kg. 457 mm 406 mm 355 mm Aaen V-4 Two Stroke Racing Engine Engine Config. Bore & Stroke Displacement HP @ RPM V-4 Drag 65 X 58.5 800cc 215 @ 10,000 V-4 Drag 74 X 58.5 1025cc 275 @ 10,000 V-4 Road Racing 67.5 X 58.5 850cc 200 @ 9250 V-4 Racing Engine
The unique V-4 engine design combines light weight with the strength to take the punishment of the most demanding conditions. The durability of the design has been proven in SCCA road racing where the V-4 engine has raced problem free for several seasons in our D-Sport race car.
1000 cc engines are presently also used in snowmobile ice drag racing and ATV sand drag racing.
The compact low inertia crank fires every 90° and allows us to rev the engine in excess of 12,000 RPM without running into any critical torsional vibrations. The 1000 cc and 800 cc drag racing motors have been raced for 7 seasons without any crank or clutch failures.
10 Port Cylinder Design
The 10 port cylinders have been carefully developed to deliver maximum cylinder filling efficiency. The cylinder filling is taken care of by 2 piston controlled intake ports, five transfer passages and triple exhaust ports. The back transfer port is a unique design that runs inside the intake port divider, giving it the direction it needs for efficient scavenging, and at the same time allowing for maximum intake flow area. A special forged piston with a wide intake skirt insures that the intake port is large enough for the highest engine speeds.
Cylinder cooling includes a water jacket around the exhaust port. Sealing between the cylinder and head is taken care of by double O-rings.
The V-4 engine breaths through a special 4 barrel manifold with 52 mm intake diameters and electronic fuel injection.
The V-4 racing engines are designed specifically for racing.
We will only sell these engines to qualified drivers fully committed to top class racing.
Last edited by Jake Speed; 11-18-2007 at 07:06 PM.
11-18-2007, 07:05 PM #2
- Join Date
- Sep 2007
- Lexington, Ky
That 275hp one would be perfect for my seadoo xp project! To bad I bet that thing costs $10k if not alot more, I cant find a price anywhere.
11-18-2007, 07:14 PM #3
11-18-2007, 07:43 PM #4
- Join Date
- Feb 2006
- Birmingham AL
sure send me one for free and I will make it work
11-23-2007, 05:59 AM #5
I believe that motor is more like $15K.
The more conventional 2 strokes still have a lot to offer as well...
1375cc Cat Dyno run.... check out the numbers.
11-23-2007, 10:12 AM #6
How about we convert one or two of these???
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By smokeysevin in forum Kawasaki PWC Performance (4-stroke)Replies: 7Last Post: 09-23-2012, 03:10 PM
By shortii_trk in forum 4-Tec PerformanceReplies: 13Last Post: 06-01-2011, 08:45 AM
By Green Hulk in forum Mudbug Nationals PWC.Life RallyReplies: 78Last Post: 03-22-2010, 02:31 PM
By melbaya in forum Polaris Open DiscussionReplies: 2Last Post: 08-04-2009, 03:20 PM
By Franko in forum Yamaha Open DiscussionReplies: 13Last Post: 12-22-2005, 11:57 AM