Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3

    Crank Case Ventilator question

    I am going to order my crank case ventilator today, but had a quick question. I think I remember reading that there was an extra fitting if you were going to install the pulley kit. Does this come with the crank case ventilator or do you have to order it separately. I do plan on getting the pulley kit, hopefully before the summer time, so I want to be able to install it properly, but don't know if I will have it right away. Maybe I am thinking about something else. Help me out if you know what I'm talking about.


  2. #2
    halfassjack's Avatar
    Join Date
    May 2007
    Location
    Nicholasville, Ky.
    Posts
    549
    i'm pretty sure that it comes with the kit. Anyone else?

  3. #3
    As far as I know it dose come with it....I think you have to tap/drill a hole for it if you plan on putting the "extra" fitting on there cuz it comes form R&D with only 1 hole

    I could be wrong but form the pics Ive seen thats what I get out of it

  4. #4
    R rated's Avatar
    Join Date
    Nov 2006
    Location
    Bayville NJ
    Posts
    502
    +1
    8
    the hole is already there you can plug it or put the extra fitting in it . hope that helps your question

  5. #5
    Beagleman62's Avatar
    Join Date
    Mar 2007
    Location
    Richmond, Virginia
    Posts
    2,726
    +1
    64
    I used both fittings. They come with the kit along with 2 hoses. There are 2 nipples on the piggyback tank. I figured I would use both because the extra ventalation can't hurt. On thing though. The blue hose that comes with the kit is stiff as hell but after you install it and run a few times it will loosen up.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	crankcase vent 002.jpg 
Views:	66 
Size:	2.16 MB 
ID:	46661  
    Last edited by Beagleman62; 11-30-2007 at 06:02 PM.

  6. #6
    Everything is there. Even on stock machines it wont hurt to add the second draft tube. Kit comes with all you need.

    Remember the kit is cheaper on GH store.

    Call Rudy as he will have alot of good information about this kit and his air intake systems.

  7. #7
    Beagleman62's Avatar
    Join Date
    Mar 2007
    Location
    Richmond, Virginia
    Posts
    2,726
    +1
    64
    Also be sure to put the fittings in the correct hole. There are 2 different sizes. (along with 2 different size hoses) They include very good instructions that are easy to follow. There will also be 2 different size fittings on the piggyback tank. The larger hose goes on the top fitting on the tank. I agree with Skip..... Buy it on the GH store and you'll save 10%
    Jimmy
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	crankcase vent 003.jpg 
Views:	55 
Size:	2.02 MB 
ID:	46662  
    Last edited by Beagleman62; 11-30-2007 at 06:11 PM.

  8. #8
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    I just ordered it off of GH and got my 10% off. Now only 5 or 6 months till I can ride again lol!

  9. #9
    English Bob's Avatar
    Join Date
    Jun 2007
    Location
    Southern UK
    Posts
    280
    Quote Originally Posted by erckawasaki View Post
    I just ordered it off of GH and got my 10% off. Now only 5 or 6 months till I can ride again lol!
    Ordered mine about 10 days ago from Rrated, tracking as we speak, landed UK side of pond yesterday......I deffo will not be waiting six months or so to try....that,d drive me potty
    More like six days... with dry suit thermals, hot water bottle and a bloody thick pair of gloves....
    Will let you know about any performance gains if any!!!!!!!!

  10. #10
    Beagleman62's Avatar
    Join Date
    Mar 2007
    Location
    Richmond, Virginia
    Posts
    2,726
    +1
    64
    Bob,
    Let us know if it revs quicker and gives you more rpm. The quicker run up through the rpm range was noticable but I have not seen many people post the same results so I was wondering if it was just me

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2009 GTI 155 Crank case vent question??
    By Unit44 in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-29-2015, 03:20 AM
  2. 2000 951 rx ltd crank case bolt question.
    By Blome in forum 2-Stroke Performance
    Replies: 2
    Last Post: 06-23-2015, 06:58 AM
  3. Gaskets for Crank Case Ventilator
    By ercBOOSTED in forum Kawasaki PWC Performance (4-stroke)
    Replies: 6
    Last Post: 06-29-2009, 03:06 PM
  4. Crank Case Reassembly Questions
    By ZOMGVTEK in forum Polaris Open Discussion
    Replies: 7
    Last Post: 07-12-2008, 08:55 AM
  5. Crank Casing Seals Question
    By Chrisrokc in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 12-28-2007, 12:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •