12-04-2007, 05:19 PM #1
after market 15F D shaft bearing housing ??
does any one make an after market drive shaft bearing housing for big horsepowered 15f's or some type of a brace to strengthen the oem one ?
12-04-2007, 05:27 PM #2
modified pump shoe and skat 160 pump should do the trick
12-04-2007, 11:49 PM #3
sorry should have mentioned in the first post
it is a turbo 15f for closed course racing
has allready got moded pump shoe and skatty 160mm 14 vein set back
problem is that it has broken acouple of the drive shaft bearings housings
it is just breaking the rubber section ?
12-05-2007, 12:39 PM #4
- Join Date
- Jul 2007
I believe Maccracing sells one. It is an aluminum housing brace that goes over your stock assembly.
12-05-2007, 12:57 PM #5
How bout a little info on your Turbo Setup. Pics, what turbo, etc...
12-05-2007, 05:01 PM #6
we have allready made up our own couplers
so looks like we need to fire up the CNC again and make a new bearing housing.
the turbo the boat uses is a Billet turbo made here on the gold coast Aust by Mr Turbo the complete centere housing is made from anaodise air craft alumiunum wich is great in the salt water compared to the cast steel housings. it is a complete roller bearing turbo he also fabed up all the manifolds .
i cant post pics or say any more than that as it is not my personal boat as i am only a member of the team.
12-06-2007, 07:45 AM #7
Why do you ask so many questions but always finish with your own answer.
We get it, you think Australia has better stuff. You did this same "ask and brag" stuff on other boards. Are you truly looking for answers or baiting a question so you can brag about your Australian products.
You went on and on about the Riva ECU and its capabilities and limitations to tell us your running an Autronics. As if you were stinging us along to tell us all about your Australia made ECU systems.
This thread was a waste. You had the answer the entire time but wanted the WWW to know you are making your own.
Man do yourself a favor.. http://www.ozpwc.com/forum/index.php
12-06-2007, 04:18 PM #8
i asked a simple question about a bearing up grade for a 15F
dubz came back with a answer for me
i thanked him as i was not aware that macc made one he also let me know macc made couplers but i said thanks we have allready made some as macc had not made any at the time we needed them.
i spoke to macc yesterday in thailand and he is sending one out for me on monday when he gets back in the shop as they are that cheap that it was not worth us making just the one or two.
we dont make stuff to sell to other people just for our own use.
where have i talked it up about austarlia making better stuff ?
i am sorry if it comes across that way
the other thing is there is more than one 15f that i have been asking questions about that is whay it seems a bit skattered
i bought the red riva 15f that was for sale on here
and my buddie has the turbo one so i ask questions for both of us.
how did i bait you about the autronic
you were the one that kept telling me to put one on and kept crpping on how they are the only way to go ???
Dubz asked me a question about the turbo set up and i replied with as much info as i could
there is enough info there for him to call the guy and get the same set up as we are running just trying to help some one out that helped me
may be read the whole post next time instead of going off half cocked
i am sorry if i have upset any one else on the forums by posting this thread.
if i have please feel free to let me know and i will leave these forums.
Last edited by dawson; 12-06-2007 at 04:34 PM.
12-06-2007, 05:16 PM #9
You spoke to Chris yesterday in Thailand?
Did you call him or meet with him?
I might be wrong but Id say your bull ****ting us.
If you met him yesterday then you must have been in Thailand but you posted from an IP address in Aus.
If you called him then you must be a good friend to have his PERSONAL INTERNATIONAL CELL PHONE number and if you are then why ask us the questions that Chris would gladly help his friend out with.....
Are you understanding my frustration?
Last edited by Skips313; 12-06-2007 at 05:25 PM.
12-06-2007, 06:45 PM #10
sorry on the technicality
spoke via e-mail
sorry should have said e-mail conversationed
do you want me to ct and paste the e-mail in for you to beleave me ???
what is with the witch hunt man let it go...
what do you want from me ??
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 1999-SLTX in forum Polaris Open DiscussionReplies: 5Last Post: 07-17-2013, 06:05 AM
By Premium2000 in forum Polaris How To & FAQsReplies: 3Last Post: 01-31-2013, 05:56 PM
By Coltsfan in forum Polaris Open DiscussionReplies: 1Last Post: 07-08-2012, 03:49 PM
By codymouse54321 in forum Conversion FAQ and TipsReplies: 3Last Post: 06-15-2011, 11:13 PM
By skigolfnut in forum Polaris Open DiscussionReplies: 1Last Post: 07-06-2009, 09:47 AM