Results 1 to 5 of 5
  1. #1
    Parts Manager, Action Powersports RaiderRyan's Avatar
    Join Date
    Dec 2007
    Location
    Venice, Florida
    Posts
    7

    Question Jet specs on 44MM Red Tops, 1995 Raider 1100??

    Good morning guys! I have a 1995 'Raider 1100 that, for the most part is stock. I just came across a set of Red Top 44's on a Riva intake manifold and reed spacer that came off of a Raider. I need to clean them and put them on my boat. What jet specs should I use? Needle/seat? #gram spring? I have Blowsion Air Filters (by Tau Ceti) on the boat, along with a 14/20 Solas prop, Pro-Tec drop nozzle and Pro-Tec top loader, Beach House sponsons. I live on the Gulf coast of Florida so I am at sea level and very high humidity. If you guys could help with this, that would be great! Dan @ WaterWorx suggested trying this forum, so here goes.

    Thanks in advance,
    Ryan


  2. #2
    DAGO RACING CREW 97GPSLEEPER's Avatar
    Join Date
    Apr 2006
    Location
    Orange, TX
    Posts
    4,228
    +1
    169
    Welcome to the forum, you came to the right place for info! You will get more help though if you post this in the Old School section. I can't help you with the jetting specs, but if you are running stock compression and cylinders, I don't think you will get much, if any benefit using the carbs. A 14/20 is too much prop for a basically stock raider.

  3. #3
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    Ryan, we used to set those carbs up 110m, 110p, 1.5N/S, and 80g spring.

    Are you trying to put the side draft manifold on?

  4. #4
    Parts Manager, Action Powersports RaiderRyan's Avatar
    Join Date
    Dec 2007
    Location
    Venice, Florida
    Posts
    7
    Thanks for the welcome and the advice. I have not put the solas in yet, going to wait for my ADA head and some mild porting first.

  5. #5
    Parts Manager, Action Powersports RaiderRyan's Avatar
    Join Date
    Dec 2007
    Location
    Venice, Florida
    Posts
    7
    Thanks for the specs, Duke. To be honest I do not know what a side draft manifold is. I have not taken the carbs and intake off of the other Raider yet, so I'm not sure what it is. As soon as I have it in my hands, I'll let you know.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 44mm red top carbs
    By MPower in forum Sea Doo 2 Stroke Skis
    Replies: 1
    Last Post: 06-09-2013, 08:25 PM
  2. 1995 Raider 1100 - Where is this water coming from?
    By jasond32 in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 08-03-2009, 06:25 PM
  3. 1995 Raider 1100 for sale
    By Dentwizard in forum Yamaha Classifieds
    Replies: 11
    Last Post: 05-20-2008, 09:22 PM
  4. Jet specs Red Top 44's on 1995 Raider 1100
    By RaiderRyan in forum Yamaha Old School Skis
    Replies: 4
    Last Post: 12-08-2007, 11:09 AM
  5. i need jetting specs on 1300 n/pv with carbs !!
    By RDH in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 03-27-2007, 09:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •