12-07-2007, 01:06 PM #1
Jet specs Red Top 44's on 1995 Raider 1100
Good morning guys! I have a 1995 'Raider 1100 that, for the most part is stock. I just came across a set of Red Top 44's on a Riva intake manifold and reed spacer that came off of a Raider. I need to clean them and put them on my boat. What jet specs should I use? Needle/seat? #gram spring? I have Blowsion Air Filters (by Tau Ceti) on the boat, along with a 14/20 Solas prop, Pro-Tec drop nozzle and Pro-Tec top loader, Beach House sponsons. I live on the Gulf coast of Florida so I am at sea level and very high humidity. If you guys could help with this, that would be great! Dan @ WaterWorx suggested trying this forum, so here goes.
Thanks in advance,
12-08-2007, 09:05 AM #2
dull silver spring
that was on a gp1200 w side draft intake and high comp
but could be a good starting point
12-08-2007, 09:17 AM #3
Thanks, Jason. I appreciate the info.
12-08-2007, 09:38 AM #4
pm duke. he knows those carbs well.
12-08-2007, 11:09 AM #5
thanks addicted, will do!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GAV in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 01-14-2010, 04:46 PM
By jasond32 in forum Yamaha Old School SkisReplies: 2Last Post: 08-03-2009, 06:25 PM
By Dentwizard in forum Yamaha ClassifiedsReplies: 11Last Post: 05-20-2008, 09:22 PM
By RaiderRyan in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 12-07-2007, 01:12 PM
By beerdart in forum Polaris PWC PerformanceReplies: 7Last Post: 05-06-2007, 04:08 PM