12-10-2007, 09:47 PM #1
Somebody just PM'd for information
I deleted you request on accident, I hope you find this here.
Hot Seat 900/1050 CDI Silver Chip
When installing the new CDI it's important to note the longest wire on the stock CDI is grey. On the Hot Seat CDI it's brown instead of grey.
Set the ignition timing to 25 degrees before top dead center at 3,000RPM.
You will need to set the piston at .155 before top dead center and mark the flywheel. This will be your timing mark at 3,000RPM.
Stock CDI is
18 degrees at 1000RPM
18 degrees at 3000RPM
16 degrees at 5000RPM
14 degrees at 6000RPM
11 degrees at 6500RPM
11 degrees at 6800RPM limit
Hot Seat Silver Chip CDI is
25 degrees at 2000RPM
25 degrees at 3500RPM
20 degrees at 5000RPM
16 degrees at 6000RPM
14 degrees at 6500RPM
11 degrees at 6750RPM
11 degrees at 7000RPM
11 degrees at 8200RPM limit
12-10-2007, 09:49 PM #2
- Join Date
- Jul 2007
- Cedar Rapids,Iowa
Looks like some TOP SECRET info there, Sure it can be post pubicly.
12-10-2007, 09:54 PM #3
Naw, this is old news and only the recreational timing curve...nothing secret here.
Last edited by ph2ocraft; 12-10-2007 at 10:21 PM. Reason: changed wording
12-10-2007, 10:18 PM #4
12-10-2007, 10:21 PM #5
12-11-2007, 02:11 AM #6
- Join Date
- Sep 2006
are we gonna throw some new domes in the mix ? your most welcome casey hope she ripps
12-11-2007, 02:09 PM #7
12-11-2007, 09:31 PM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By MilleniumGPR in forum Yamaha PWC Performance (2-stroke)Replies: 24Last Post: 06-10-2010, 09:48 AM
By diskos in forum Sea Doo Open DiscussionReplies: 8Last Post: 06-03-2010, 01:31 AM
By cowranch 2006 in forum Polaris Open DiscussionReplies: 4Last Post: 10-07-2009, 10:46 AM
By L Carlson in forum Yamaha 2 Stroke SkisReplies: 1Last Post: 07-17-2009, 06:15 PM
By chevyll in forum Yamaha How To & FAQsReplies: 15Last Post: 04-26-2008, 11:19 PM