Thread: How do you check slip moment?
12-17-2007, 06:31 PM #1
- Join Date
- Dec 2007
- Townsville, Australia
How do you check slip moment?
hey guys i did a search but couldnt find a specific answer...
can someone explain the process for checking slip moment and the tools required?
12-17-2007, 06:44 PM #2
I myself stick a broom handle in the prop instead of locking the camshaft to keep engine from spinning then follow directions from the manual
You need a broom (wooden handle)
torque wrench (dial type is the best)
and 1 socket that fits the nut on the supercharger impeller
just follow directions
12-17-2007, 08:23 PM #3
The best way is to bench test it.
Install the supercharger on the service mounting plate.
The service mounting plate is held in a vice.
Use the gear holding tool to hold the gear still and then turn the impeller nut counter clockwise with a dial type torque wrench to read the slip of the clutch.
12-18-2007, 03:50 AM #4
- Join Date
- Aug 2007
how much slip should it be for the stage 3 sc??
12-18-2007, 07:16 AM #5
u should see 11 to 12 lbs BEFORE it lets loose and slips with stage 3 and 3+ above equipment and i also bench test mine for the BEST most accurate readings.
12-18-2007, 07:40 AM #6
12-18-2007, 07:44 AM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By hotbird in forum 4-Tec PerformanceReplies: 7Last Post: 05-30-2012, 07:30 PM
By mr. t in forum 4-Tec PerformanceReplies: 12Last Post: 09-19-2011, 06:24 AM
By coastalfun in forum Yamaha Old School SkisReplies: 1Last Post: 02-28-2011, 10:04 PM
By WBoulton in forum 4-Tec PerformanceReplies: 10Last Post: 12-08-2010, 10:00 AM
By pastordug in forum Polaris How To & FAQsReplies: 10Last Post: 08-14-2009, 10:18 PM