Thread: Looking for a Part Tester
12-20-2007, 03:00 PM #1
Looking for a Part Tester
I'm looking for someone with the following:
-Good/quick wrenching skills
-A RXP (maybe RXT too) that they feel is 'maxed out' with its current setup i.e. 100% tuned in
-Location is near sea level and temps around 70+
-Willing to test a part at no cost and return it after testing
-Able to provide consistent and accurate back-to-back results
I've got an exhaust manifold spacer that I never got around to testing. I've got the bolts for it, but two need to be trimmed a couple mm. I also have some installation advice for it. It's advertised to give 1 mph on top. I'd like to see if it's the real deal, but temps are below freezing up here in NY. Anyone who is qualified according to all of or most of the above statements and is interested please PM me or reply to this post.
12-20-2007, 03:11 PM #2
can't wait to hear someone's findings from this piece. good deal for someone no doubt! u get to test something for free to see if it works, can't beat that!!
12-20-2007, 04:10 PM #3
A gprxp should give sound results....San Diego California doesnt get any better than that..
12-20-2007, 04:48 PM #4
Well..not exactly. Each HP added on a GPRXP has the potential to cause greater improvement than it would on the RXP, mainly because of the hull efficiency. There is the pump difference between the two skis as well.
Although I wouldn't mind sending it out to you, Joe, I would prefer it's tested on a RXP. If you have both, you could test both just as long as you test the RXP first for the results I'm looking for.
12-20-2007, 05:03 PM #5
I'll give it a shot testing Sunday.Let me know RXP only
12-20-2007, 05:06 PM #6
I will help test, James. We should still have some good weather in Florida.
12-20-2007, 05:15 PM #7
Both of you guys let me know when is a good time and where to send it.
12-20-2007, 05:17 PM #8
12-20-2007, 05:21 PM #9
12-20-2007, 05:22 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By IEGPR in forum Yamaha Open DiscussionReplies: 0Last Post: 07-09-2008, 06:17 PM
By 510ducati in forum Polaris ClassifiedsReplies: 0Last Post: 06-14-2008, 05:54 PM
By maineak1970 in forum Polaris ClassifiedsReplies: 9Last Post: 05-15-2008, 01:13 PM
By petros the plumber in forum Kawasaki PWC Performance (4-stroke)Replies: 23Last Post: 12-06-2007, 05:45 PM
By Souljavu in forum Yamaha Open DiscussionReplies: 4Last Post: 11-30-2007, 07:08 PM