Thread: GP1300R misfiring
12-23-2007, 07:33 PM #1
gpr1300r 2003.Two weeks ago went riding and ski started missing and bogging.I thought it might have been a stuck ring from cold water,but did comp check 120 all three.Changed plugs this morning same problem midrange misfiring tops out at 48-50 mph on dreamometer.Checked codes it flashes 48 briefly and then 01.I know 48 is INNCORRECT DATA TRANSMISSION but where do I look for problems?? all cylinders have spark? Thanks in advance for any suggestions you may have,scott.
12-23-2007, 07:35 PM #2
Welcome to the forum.
Give it a little bit, one of our EFI gurus will chime in shortly to help you.
Here is a list of the EFI codes
Last edited by RX951; 12-24-2007 at 10:28 PM.
12-24-2007, 06:24 AM #3
Thanks RX951,There must be some procedure to follow for this code?I am tring to avoid dealer at $95.00 per hour!Would the yamaha diagnostic software and harness i've read about here help?If so anyone know someone in n.j. that has it? Thanks scott.
12-24-2007, 08:29 AM #4
- Join Date
- Oct 2005
Welcome to the board Sharkriver!
Hopefully someone can help you out.
I see that your in NJ, maybe you could join us for a ride this summer!...PR...
12-24-2007, 08:34 AM #5
What mods have been done to the boat ?
12-24-2007, 09:18 AM #6
Hi guys,Pale Rider sounds good I live in wall twsp.WFO no mods yet,Ijust picked this ski up Thanksgiving day.I've only riden it for about three hours ,had 49 on it when I bought it.first mod will be intake grate before next summer!P.S. went through every forum on here before bothering you guys.have a great holiday!!!scott
12-24-2007, 01:01 PM #7
Hey sharkriver.... I live in howell and have the YDS software... I don't think it works on the 03 models though... I think its just 04 and up. I haven't gotten to use the software yet because my engine is on my work bench but if you want to swing by after the holidays and hook it up to my laptop we can see what the deal is if it works....
12-24-2007, 04:44 PM #8
12-24-2007, 04:58 PM #9
- Join Date
- Nov 2005
- Charleston, SC
when you pull your plugs are they all the same color or is one wetter or drier than the others?
12-24-2007, 05:21 PM #10
Hi Mikel70,the first time I pulled the plugs for this problem the front plug was wet other two were fine switched plugs in cyls same problem!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By bgruhn76 in forum Yamaha PWC Performance (2-stroke)Replies: 15Last Post: 05-15-2012, 01:58 PM
By sharkriver in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 12-30-2007, 10:27 PM
By Spager in forum Yamaha PWC Performance (2-stroke)Replies: 17Last Post: 12-09-2005, 12:07 AM
By Lurker in forum 4-Tec PerformanceReplies: 29Last Post: 09-16-2005, 12:49 PM
By FireFox in forum 4-Tec PerformanceReplies: 0Last Post: 09-07-2005, 02:50 PM