Results 1 to 8 of 8
  1. #1
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2

    I need your help! ( taking off Turbo-Tube)

    Alright, I am going to do some engine work.. and am going to sell my Protec Turbo tube...

    I am going to have to take it out, but am wanting help from you guys.

    I can go out and take some pictures of the engine, and where they connect on the turbo tube and what not.. and if you guys could maybe help me/direct me on which bolts to take off, and what tubes to undo so I can get this puppy out!

    I am wanting to start work tonight, maybe finish tonight.. or atleast get something done!

    Then When its out, I am going to do things like pull my head off, and get some work done with it and what not...


  2. #2
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    Here are some pictures, if you guys need some more to help... tell me where to get pictures, and I will go snap a few, and post them!

    Thank you for your help! I am hoping to get a lot more arm room with it out so I can work down in it!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	jet ski part 003.JPG 
Views:	80 
Size:	1.31 MB 
ID:	50240   Click image for larger version. 

Name:	ski 004.JPG 
Views:	62 
Size:	1.30 MB 
ID:	50241   Click image for larger version. 

Name:	ski 005.JPG 
Views:	66 
Size:	1.15 MB 
ID:	50242   Click image for larger version. 

Name:	ski 009.JPG 
Views:	73 
Size:	1.18 MB 
ID:	50243  

  3. #3
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    It is not much different than the stock one. Look it up in the shop manual. There are literally step by step directions.

  4. #4
    Moderator Insanediego Joe's Avatar
    Join Date
    Mar 2006
    Location
    San Diego, California, United States
    Posts
    5,885
    +1
    142
    Loosen the clamps on the boot, push boot forward, loosen the inner boot clamps, remove hoses. Lossen clamp at bottom of pipe near waterbox. Remove the bolts from the exhaust stays. push pipe back and lift out....

  5. #5
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    so should I just go through, and unbolt/unscrew the parts attaching on both side, and onto the head...

    and pull that sum'hitch out?

    and BAGGY THE SCREWS!!!

  6. #6
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    also can you tell me the head, do I just unbolt all those screws, and pull that off... and about how much would it cost to get it milled to like 91 octane?

    $50? $70? $80? $120?


    And also how to take off the stock flame arrestor box

  7. #7

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    and what year ski /after look at pix ,you may what to take time with mod's and glue that pump tunnel down to start

    later cd

  8. #8
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    yeah I'm going to do that...

    I'm going eventually make a thread, like a PWC diary haha my PWC myspace...

    and write everything out...

    12:34 I just woke up, and am very tired... a new day of work has begun, and I am going to try to get the carbs out

    3:30 Carbs are out, and I noticed I need to get them .....

    4:00 I am now eating a sandwhich that my mom made me, it is delicious

    4:10 I am done

    4:30 Back to work


    hahahaha do something like that!!! no im joking... I'll take some pictures tonight, and try to pull that thing out... and write out my game plan!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. turbo gurus, need your help
    By GasResearch-VT.SE in forum 4-Tec Performance
    Replies: 5
    Last Post: 01-31-2015, 10:28 AM
  2. I need your help! ( taking off Turbo-Tube)
    By HallPass in forum Yamaha How To & FAQs
    Replies: 7
    Last Post: 12-30-2007, 09:26 PM
  3. RQ. I need your help over at petes again.
    By ccassone in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 06-08-2006, 10:20 PM
  4. Paging 96XPSS. I need your help over at snkypete's!
    By ccassone in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 04-25-2006, 06:42 PM
  5. OK Pine box derby experts - I need your help
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 11-16-2005, 04:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •