Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1

    Hello > code help please

    my name is Derek from Scotland now in the gold coast au and I found this site the other day and boy what a site and I am pleased to say thank you guys for all your help and knowledge but went through all the forum looking for an answer couldent find an answer so PLEASE dont ask me to read all again as I spent 4+ hours last night looking ......... ok its simple I bought MY first jetski a polaris genesis 2001 and it was second hand it is unlocked but cant lock it factory 1234 not working any help to reset it please ...... tnx in advance any and all help .............. Derek


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,593
    +1
    1,275
    Any chance you can ask the previous owner what lock code he used?

    If not, have you looked in the Service Manual?
    http://www.mattmans.com/polaris/upload/

    Try the 2002 Polaris, or the 2004 MSX...

    I am not sure, but you MIGHT be able to reset the lock code by disconnecting the battery for a couple of days. Not sure if it will reset the lock code, or the hour meter...

    There was a reset sequence for the old MFDs;
    Pressing both the Mode and Set keys for 10+ seconds.

    I do not know what the buttons would be on the newer MFI displays.

  3. #3
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    To enter your own code
    Hold down the lock button for a few seconds
    First you'll see lock status, ENTER CODE and then
    CHANGE CODE should pop up.
    Lastly you should see OLD CODE, enter the code number (hope it's 1234), if it is the display will show NEW CODE
    Enter your new 4 numbered code
    The display will show CODE CONFIRMED
    Re-enter your new code again
    CODE CONFIRMED will stay for a few seconds if the two numbers match.

    You'll find more detailed instruction in the tech section under DOWNLOADS in the 2002 Genisis book.
    Look under Electrical Systems and you'llfind a couple of pages on the MFD.

    Oh and WELCOME to the Green Hulk Forums!!!

  4. #4
    axgrider73's Avatar
    Join Date
    Feb 2007
    Location
    Southeast Ohio
    Posts
    2,059
    Quote Originally Posted by K447 View Post
    Any chance you can ask the previous owner what lock code he used?

    I am not sure, but you MIGHT be able to reset the lock code by disconnecting the battery for a couple of days. Not sure if it will reset the lock code, or the hour meter... This will not work
    Welcome to the Green Hulk Forums!!

    If I understand your post correctly, you know HOW to lock/unlock the MFD, you just don't know what the previous owner used as a code?

    If so, you will need the help of a dealer. There are a couple of great guys on this site that might be able to help you out. Read the post below.

    http://greenhulk.net/forums/showthre...ight=lock+code

    Let us know how it goes. Good luck!

    -Rob

  5. #5

    code help

    Hi Guys thanks for the posts I have read the book and know how to get into the code section its just I dont know the old code and was hoping someone had a way of reseting it the factory 1234 dosent work the last guy must have used his own code .......... thanks for all reply posts ...... Derek
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC00006.JPG 
Views:	93 
Size:	221.5 KB 
ID:	51030  

  6. #6
    axgrider73's Avatar
    Join Date
    Feb 2007
    Location
    Southeast Ohio
    Posts
    2,059
    Have you read through the post I mentioned above? Have you contacted Jay at Atlantic or Chip?

  7. #7
    Quote Originally Posted by axgrider73 View Post
    Have you read through the post I mentioned above? Have you contacted Jay at Atlantic or Chip?
    Thanks axgrinder73 sent chip a message waiting for his reply and thank you for the help

  8. #8

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    Quote Originally Posted by emailderek1 View Post
    Thanks axgrinder73 sent chip a message waiting for his reply and thank you for the help
    OK here we go
    now this is for unlocking BUt it should reset to defalt
    take blue wire & pink wire on oil inj.tank& fuel sender ,short together and go to ground.next wake up display,push in defalt code and see if that reset code

    later cd

  9. #9
    axgrider73's Avatar
    Join Date
    Feb 2007
    Location
    Southeast Ohio
    Posts
    2,059
    Quote Originally Posted by chip View Post
    OK here we go
    now this is for unlocking BUt it should reset to defalt
    take blue wire & pink wire on oil inj.tank& fuel sender ,short together and go to ground.next wake up display,push in defalt code and see if that reset code

    later cd
    Thanks for the info Chip!

    A mod should stick Chip's post in the tech section.

  10. #10
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,593
    +1
    1,275
    Quote Originally Posted by emailderek1 View Post
    ...sent chip a message waiting for his reply and thank you for the help
    Quote Originally Posted by chip View Post
    OK here we go
    now this is for unlocking But it should reset to defalt
    take blue wire & pink wire on oil inj. tank& fuel sender, short together and go to ground.
    next wake up display, push in defalt code and see if that reset code

    later cd
    emailderek1;
    Let us know if this actually worked for you.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Error code help please
    By 83Gator in forum 4-Tec Performance
    Replies: 19
    Last Post: 09-23-2015, 09:35 PM
  2. Who wants to help me solve P0520 Code? Help Please
    By Jaxsonsmith in forum 4-Tec Performance
    Replies: 12
    Last Post: 08-19-2014, 06:07 PM
  3. code help please 2012 rxtx as260
    By monsoonmadness in forum 4-Tec Performance
    Replies: 4
    Last Post: 08-03-2013, 12:02 PM
  4. 2004 gtx codes help please
    By wyoradcat in forum 4-Tec Performance
    Replies: 13
    Last Post: 07-13-2012, 11:21 PM
  5. Hello > code help Please
    By emailderek1 in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 01-04-2008, 10:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •