Results 1 to 8 of 8

Thread: HELP please

  1. #1
    Student of Speed rxpwhistler1's Avatar
    Join Date
    Nov 2007
    Location
    Oakland County Michigan
    Posts
    708

    HELP please

    I just pulled the exhaust, intake and all hoses to remove supercharger. I have the hex tool and everything but the bolt behind the blower it too tightly close to everything to fit the socket and wrench. I have no u joint or even a box wrench!! Anybody have any suggestions? I need to get this thing offff


  2. #2
    1/4 inch wrench

  3. #3
    Gotta love this sport! 05Limited's Avatar
    Join Date
    Apr 2005
    Location
    Stockton, CA
    Posts
    2,677
    +1
    4
    Use a 1/4 inch, six point, box end wrench. Ensure it is embedded all the way on the bolt head and start applying pressure. You may need to extend the wrench with a short piece of tubing or another wrench, but what ever you do, apply pressure gradually while ensuring the wrench is completely embedded on the bolt head. When you reinstall don't use the original bolt... buy a hex head replacement.

    Jeff

  4. #4
    very good description 05, I should have been more specific, thanks

  5. #5
    Gotta love this sport! 05Limited's Avatar
    Join Date
    Apr 2005
    Location
    Stockton, CA
    Posts
    2,677
    +1
    4
    Actually, I didn't know you had already helped him. If you saw how slow I type you'd know why I often miss the fact that others have already chimed in

  6. #6
    Student of Speed rxpwhistler1's Avatar
    Join Date
    Nov 2007
    Location
    Oakland County Michigan
    Posts
    708

    thanks

    I am going to have to come back tomorrow and will just buy the ujoint..I have no 1/4 wrenches with me because im ADD and forgot hahah. I have a regular three point open ended but that will not work. How much are the replacement bolts because this bolt is going to be jacked.

  7. #7
    MIARider's Avatar
    Join Date
    Aug 2007
    Location
    S. Florida
    Posts
    1,430
    You should buy a few anyways and keep them around, those screws srtip easily.

  8. #8
    Student of Speed rxpwhistler1's Avatar
    Join Date
    Nov 2007
    Location
    Oakland County Michigan
    Posts
    708

    yea

    well i am just going to buy three new bolts, anybody know the size and where to buy off hand?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need HELP Please!
    By GeoRXT in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-30-2006, 08:04 AM
  2. HEy Guys Need Help PLEASE!!!
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-06-2006, 01:29 AM
  3. RXT 2005 Loose Hose - HELP PLEASE
    By BrAinZ in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-12-2006, 12:28 PM
  4. Can some one Post! A little Help Please!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2005, 07:57 PM
  5. RXP Handling !! Anyone help please
    By rxp_boy in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-17-2005, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •