Thread: Graco Strainer placment
01-13-2008, 04:49 PM #1
Graco Strainer placment
I am going to be installing a graco strainer. Can ya share some info or pictures of where folks have theres mounted. I have a 04 RXP
Thank you in advance
01-13-2008, 05:22 PM #2
01-13-2008, 05:48 PM #3
I have a stock intercooler so i put mine here.
01-13-2008, 06:03 PM #4
01-13-2008, 06:16 PM #5
01-13-2008, 06:28 PM #6
Thank you for the info. Are you drilling the hull to mount on the side or under the lip of the hull below the cowl.
01-13-2008, 06:42 PM #7
If on an rxp you can use the rear tow hook bolts (Center tow hook below the seat) to hold the bracket for the strainer. It actually lines up perfect and is easily accessible. Just line the bracket up and drill two holes through it. Use the oem nuts and washers to hold it on. I’ll try to get a picture tomorrow after this blizzard we’re supposed to have..
Best part of this location is No Need To Drill The Hull!
Last edited by kp04rxp; 01-13-2008 at 06:45 PM.
01-13-2008, 07:23 PM #8
- Join Date
- Jul 2007
any where that is away from the j pipe and the exhaust manifold
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Stainless in forum 4-Tec PerformanceReplies: 25Last Post: 04-04-2008, 07:42 PM
By RXPNJ in forum 4-Tec PerformanceReplies: 7Last Post: 08-10-2007, 08:55 PM
By XRIDER in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 04-20-2007, 12:21 PM
By Jeff C in forum Sea Doo Open DiscussionReplies: 6Last Post: 04-22-2006, 08:42 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 5Last Post: 03-22-2006, 10:04 AM