Results 1 to 3 of 3
  1. #1
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3

    converting 2002 XP to pre-mix

    hello all my girlfriends son has a 951 xp and the oil feed barb broke so while doing the upper rebuild this weekend I have ordered the oil block off kit from ebay. I am looking for any tips or information on doing this. I have done a search and found 4 threads to read but want more Info.

    blockoff install instructions.
    DO i leave an amount of oil in tank?
    is 32:1 the reccomended mix ratio

    anything else, looking for info from someone who has done this

    Thanks in advance


  2. #2
    Tool Bag water worx's Avatar
    Join Date
    Aug 2006
    Location
    Sunny Fla
    Posts
    1,925
    +1
    66
    Quote Originally Posted by meirvin View Post
    hello all my girlfriends son has a 951 xp and the oil feed barb broke so while doing the upper rebuild this weekend I have ordered the oil block off kit from ebay. I am looking for any tips or information on doing this. I have done a search and found 4 threads to read but want more Info.

    blockoff install instructions.
    DO i leave an amount of oil in tank?
    is 32:1 the reccomended mix ratio

    anything else, looking for info from someone who has done this

    Thanks in advance
    Remove front mag cover & pull out oil pump drive in end of crank,remove oil pump install blockoff plate,take out oil tank,premix at 44 to 1 or 32 to 1.

    I cut the electrical connector on the oil tank,join the 2 wires together & plug back in on the ski,this will shut your oil light off.

    Thats about it.

  3. #3
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,381
    +1
    165
    Correct...and make sure your yamaha buddy puts it together correctly

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 750 ZXi Converted to pre mix - change carb jetting required?
    By Millertime44 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-03-2011, 07:33 AM
  2. Is oil tank still needed when converting to pre-mix?
    By DKFox in forum 2-Stroke Performance
    Replies: 4
    Last Post: 03-28-2011, 07:18 PM
  3. Need help on converting my 2008 gpr1300 to pre mix?
    By ZIGGY18 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 11-08-2010, 09:32 PM
  4. converting to pre-mix at rebuild question
    By toyterrific in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-19-2010, 08:03 PM
  5. How to convert my ski to Pre-mix
    By MilleniumGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-09-2010, 10:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •