Thread: AutoCAD users....
01-16-2008, 08:09 PM #1
I need some help. I have not used the program in a long time and do not remember how to set the limits for a plan....Anyone?
01-16-2008, 08:13 PM #2
Why do you want to set the limits?
At my work we just have a box that we need draw within, if the object is bigger than the box we go to a different scale drawing template, or just resize the print view (use view point to create you print area) area on the layout tab.
01-16-2008, 08:21 PM #3
I need to set the limits for the space I will design on....
01-16-2008, 08:24 PM #4
01-16-2008, 08:36 PM #5
I was actually talking about both, but here goes with setting up the limits.
type "limits" in the command prompt, should be located at the bottom unless you have moved it
Then it will ask you "Specify the lower left corner or [ON/OFF] <0.0000,0.0000>:" Hit enter
"Specify upper right corner <12.000,9.000>:" (mine is set at 12.000,9.000 but it can be anything.
01-16-2008, 08:39 PM #6
or you can go to "Format" "Drawing limits", I don't use the drop down menus, I use the command prompt, unless I am saving or printing.
01-16-2008, 08:41 PM #7
01-16-2008, 08:47 PM #8
01-16-2008, 08:58 PM #9
I am actually designed PWC Trailer 2.0
The photo below is Trailer 1.0
01-16-2008, 09:01 PM #10
- Join Date
- Nov 2007
- Odessa, TX
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By upgraded in forum Open DiscussionReplies: 8Last Post: 05-06-2011, 12:11 PM
By GeoRXT in forum Open DiscussionReplies: 2Last Post: 01-16-2008, 11:25 PM
By BrAinZ in forum Sea Doo Open DiscussionReplies: 1Last Post: 11-06-2005, 06:55 AM
By BrAinZ in forum Sea Doo Open DiscussionReplies: 2Last Post: 11-03-2005, 03:09 PM
By Angelse68cal in forum Sea Doo Open DiscussionReplies: 2Last Post: 08-30-2005, 07:13 PM