Results 1 to 4 of 4
  1. #1
    born riding's Avatar
    Join Date
    Mar 2007
    Location
    richmond, va
    Posts
    294
    +1
    3

    whts best dome size 2 use w/ fp wet pipe?

    what is the best domecc size to use with the factory pipe wet pipe on an 04 sxr? Reliability is very important! (so is performance) 28,29....?


  2. #2
    SXR Guru
    Join Date
    Sep 2006
    Location
    SoCal
    Posts
    105
    What head is it you are going to install? You want to run race gas or pump gas? How much timing? Any porting done? Lot's of variables to take into consideration.

  3. #3
    born riding's Avatar
    Join Date
    Mar 2007
    Location
    richmond, va
    Posts
    294
    +1
    3

    well not much....

    Quote Originally Posted by Ragged Edge Racing View Post
    What head is it you are going to install? You want to run race gas or pump gas? How much timing? Any porting done? Lot's of variables to take into consideration.
    well...i was thinking R&D or TBM...pump gas...no timing advance so far but i do have the fact. pipe air temp plug ( i heard it helps), no porting...
    i do have tue-ceti flame arrestors, and a buddy of mine re-jetted my carbs for me. (i'm still learning and not gonna take a chance on my ski till im good)
    I do have plate, grate, light wgt 3DR hood,RRP handpole......

    i'm not racing anymore and i have been getting more into free riding so i am trying to get a little more bottom end....thanks

  4. #4
    SXR Guru
    Join Date
    Sep 2006
    Location
    SoCal
    Posts
    105
    I run the ADA girdled head with 30cc domes and am at about 180lbs. on pump gas. Being you aren't running a drypipe, which I would highly recommend, you don't need a girdled head really. TBM is good too. Just call Tim at TBM and he will get you close to what you are looking for based on your altitude where you live. The additional 10lbs of compression isn't going to garner you much btw. Have you bored your exit nozzle to 80mm? You should...Timing advance will help a tad on bottom. Stock prop is not bad either.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best place to buy used RXP engine
    By greeksupra in forum 4-Tec Performance
    Replies: 5
    Last Post: 03-12-2009, 08:43 PM
  2. How much compression/what dome size for 66e on pump gas.
    By WaveDemon in forum Yamaha PWC Performance (2-stroke)
    Replies: 19
    Last Post: 12-14-2007, 05:53 PM
  3. Replies: 7
    Last Post: 07-17-2007, 10:28 PM
  4. Where's the best place to locate used pump?
    By gbest in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-03-2007, 03:05 PM
  5. What is the best Head gasket to use
    By Speed796 in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 02-14-2007, 10:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •