Thread: VF3 reed spacer bolts
01-17-2008, 02:55 PM #1
VF3 reed spacer bolts
Hey Guys, I was wondering if someone could confirm the size/length of allen head bolts needed to hold in the reed spacer on the vf3 setup for carbed boats. I have a set but I think they are for fuel injected setup. HELP!
Maxadrenaline bought my reeds and i don't want to ship until I have all the parts. Thanks
01-17-2008, 03:00 PM #2
EFIs are M8x50mm
(if whats left of my memory serves)
01-17-2008, 03:12 PM #3
Measure your bolts.I believe mine are 6x35mm thats with the Speedwerx manifold(carbed).I cant check till later though.
6X35mm is the stock length though.
Last edited by WATER WOODY; 01-17-2008 at 03:38 PM.
01-17-2008, 03:15 PM #4
Ah chit, I'm at work and can't get them measured till late tonight. Can't believe I didn't think to measure what I had to compare. DOH!
What I really need is the length of bolts for carbed boat.
Last edited by dhoad; 01-17-2008 at 03:20 PM. Reason: doh!
01-17-2008, 03:25 PM #5
01-17-2008, 03:29 PM #6
01-17-2008, 03:29 PM #7
so the carbed boats need one 5-10mm shorter correct?
01-17-2008, 03:30 PM #8
damn, that WFO builds fast skis and can type fast also!
01-17-2008, 04:16 PM #9
18 x 30mm
4 x 40mm
22 x 6m washers
01-17-2008, 04:19 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GPRFrank in forum Yamaha ClassifiedsReplies: 9Last Post: 12-21-2010, 07:24 PM
By rob2337 in forum Polaris Open DiscussionReplies: 31Last Post: 11-06-2009, 08:59 PM
By tenjuna in forum Polaris ClassifiedsReplies: 2Last Post: 09-30-2009, 10:27 PM
By neversatisfiedmotorsports in forum Yamaha ClassifiedsReplies: 1Last Post: 04-19-2009, 10:54 PM
By ecpChris in forum Yamaha ClassifiedsReplies: 20Last Post: 07-26-2008, 10:21 PM