Thread: compression check
01-19-2008, 05:11 PM #1
When checking compression on an 05 rxp do I need to ground plug electrode against head/block.
I understand the 5-10% rule across all three holes, but is a good number considered 145lbs?
Last edited by dhoad; 01-19-2008 at 05:12 PM. Reason: sp.
01-19-2008, 08:33 PM #2
When checking your engine compression you should unplug all 3 coils from your engine, open your throttle body all the way, and crank your engine around four times over, till your maximum compression reading shows on your gauge.It should read around 120-135psi on an 05 RXP. It is advised for better readings to warm-up the engine before performing compression.
01-20-2008, 09:42 AM #3
thanks, Newbie with rxp.
01-20-2008, 12:12 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JJLee138 in forum Sea Doo Open DiscussionReplies: 13Last Post: 07-26-2008, 05:32 PM
By MysssticGhost in forum 2-Stroke PerformanceReplies: 1Last Post: 06-23-2008, 07:18 AM
By kevan TX in forum Polaris How To & FAQsReplies: 13Last Post: 02-22-2008, 01:41 PM
By Ski Monkey in forum Yamaha Open DiscussionReplies: 0Last Post: 01-24-2008, 10:59 AM
By xplayer2885 in forum Polaris Open DiscussionReplies: 6Last Post: 04-05-2007, 08:50 PM