Results 1 to 5 of 5
  1. #1

    Join Date
    Jun 2005
    Location
    Hamilton, Ontario, Canada
    Posts
    556

    RXP-X Impeller housing and venturi

    Does anyone know if the impeller housing and venturi on the RXP-X is the same as the current RXP? I ask because as I put my 04 RXP back to stock, I am wondering which parts will fit the X. So I was more or less curious if the pump wedge and VTS extension rod that I have on my current ski, will fit the new one. I am referring to the Riva wedge and VTS rod.


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,064
    +1
    790
    It will fit the pump, but you will need your exit nozzle. The RXP-X exit nozzle is cut almost in half to get the bigger diameter.
    Her is a pic from the post
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P1110263[1].JPG 
Views:	85 
Size:	727.6 KB 
ID:	53695  

  3. #3

    Join Date
    Jun 2005
    Location
    Hamilton, Ontario, Canada
    Posts
    556
    So the wedge could still be used. Just not the extension rod. Correct?

  4. #4
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,064
    +1
    790
    IMO the wedge on the X would still need a extension for the VTS rod.
    I would just get anothere RXP nozzle and keep your Wedge and Rod.

    Some people hate the wedge??? Its a toss up, but I think you could use it.

    ,

  5. #5

    Join Date
    Jun 2005
    Location
    Hamilton, Ontario, Canada
    Posts
    556
    They were relatively inexpensive, and really I won't get much for them used. So I'll more then likely just keep them and experiment with the X. Thanks for the input.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB RXP-X VTS Housing and Starter Housing
    By oz_speed in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 08-27-2011, 09:31 AM
  2. Need a Impeler housing and prop for a F-12X Turbo
    By Dirtnut in forum Honda Performance
    Replies: 4
    Last Post: 09-15-2008, 11:15 PM
  3. spacer between stator housing and impeller
    By fx160 in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-20-2008, 04:30 PM
  4. For Sale: I have 2 RXP Solas Impellers, 15/19.25 and 15/19
    By GregHoss in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 08-02-2008, 09:56 PM
  5. RXP speeds vs rpm and impeller pitch
    By Vern in forum 4-Tec Performance
    Replies: 21
    Last Post: 02-10-2007, 11:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •