02-13-2008, 05:55 PM #1
For those that don't want to drill a hole in their hull for the thru hull exhaust
Riva has released their free flow "power pipe style" exhaust kits
These replace the stock rubber exhaust hose and plastic resonator and connect to the stock exhaust outlet.
02-13-2008, 06:06 PM #2
Do you know if these are made from the thin metal tubing or plastic or rubber?
I do not need one, just wondering what riva made them from.
02-13-2008, 06:28 PM #3
What would be the benefit of this pipe over the old free flow kit?
Is this going to be as loud as the free flow? Will it come with ear plugs??
02-13-2008, 06:29 PM #4
says its made from aluminum and powder coated.
Now where is the dual exhaust kit
02-13-2008, 06:37 PM #5
02-13-2008, 06:40 PM #6
02-13-2008, 07:32 PM #7
Just drill the hole!! Don't be scarred
02-13-2008, 07:35 PM #8
the all metal pipe will be a tad louder than just the free-flow pipe and OEM rubber exhaust hose.....I know from experience
Last edited by cosmic; 02-13-2008 at 07:39 PM. Reason: a tad
02-13-2008, 07:36 PM #9
02-13-2008, 11:10 PM #10
- Join Date
- Oct 2005
the free flow kit just gets rid of the resonator, the pipe gets rid of the rubber OEM hose and the resonator. Loud? of course .
annoying, maybe to some at low speeds, but that`s not the issue, it`s to reduce the chances of a burn thru with the stock rubber hose by eliminating it and the plastic res.
Looks like a very nice piece Jer! even includes a nice coupler, no more cutting a piece of the OEM hose, excellent!...
Last edited by Pale Rider; 02-13-2008 at 11:12 PM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum 4-Tec PerformanceReplies: 19Last Post: 07-31-2006, 03:40 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 80Last Post: 07-01-2006, 06:57 PM
By rotax racing in forum 4-Tec PerformanceReplies: 11Last Post: 05-19-2006, 06:10 AM
By Pale Rider in forum Sea Doo Open DiscussionReplies: 5Last Post: 03-04-2006, 08:26 AM
By ABBOTT in forum Yamaha How To & FAQsReplies: 0Last Post: 02-23-2006, 12:33 AM