Thread: What clamps to buy for RXT-X??
02-25-2008, 10:40 PM #1
- Join Date
- Feb 2008
What clamps to buy for RXT-X??
I will be buying a RXT-X and want to fix the hose clamp exhause issue...does anyone have an online link to where I can purchase the CORRECT clamps??????
02-25-2008, 10:46 PM #2
02-27-2008, 11:02 AM #3
- Join Date
- Dec 2005
- Fountain Hills Az.
You can get clamps from Hot produces or your best bet is your frendly NAPA parts store, you need a 4 inch clamp.
02-27-2008, 11:06 AM #4
02-27-2008, 06:51 PM #5
He could be right, I got new T-bolts for my Riva Exhaust and the OD silicone coupler measured 3.1600" (I used my digital caliper). The measurement was taken with the exhaust tube in the coupler. I ordered clamps for 2.75" silicone coupler. But this is on the Riva thru hull exhaust sytem for an 06 RXT, not the oem.
02-27-2008, 07:03 PM #6
I really dont think clamps are going to fix the problem, its only going to prolong it. The hose needs to be modified or replaced.
02-27-2008, 07:23 PM #7
Sanding the flange on the waterbox with 60 grit will help keep the hose from slipping off.
02-27-2008, 07:29 PM #8
02-27-2008, 07:41 PM #9
get inside the hose and ruff it up with a dremel/sandpaper wheel, add hightemp silicone. like they do on the 215 hose going into the Jpipe. I could see a recall coming soon
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jimmayor007 in forum Sea Doo Open DiscussionReplies: 3Last Post: 11-26-2013, 08:37 PM
By smoked134134 in forum 4-Tec PerformanceReplies: 15Last Post: 04-12-2013, 09:17 AM
By Mark82 in forum 4-Tec PerformanceReplies: 13Last Post: 09-23-2010, 04:55 AM
By 2006 RXT in forum Open DiscussionReplies: 38Last Post: 10-15-2007, 03:12 PM
By Sosa62 in forum Sea Doo Open DiscussionReplies: 2Last Post: 06-04-2007, 04:39 PM