Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1

    Join Date
    Jan 2007
    Location
    Georgia
    Posts
    20
    +1
    1

    impellar removal and pump removal

    Is the impelllar holding tool required? I am going to pull both on two skis and send to Impros, but this is all new to me. I have the manual and it doesn't seem real bad, but do I need the holding tool?

    Are there any other tips or advice?

    Jason


  2. #2
    jtskir15f's Avatar
    Join Date
    Oct 2007
    Location
    Dubuque, IA
    Posts
    958
    get the impeller removal tool. you dont need the holder tool if you have a vice to use.

  3. #3
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,446
    +1
    650
    Quote Originally Posted by jtskir15f View Post
    get the impeller removal tool. you dont need the holder tool if you have a vice to use.
    +1

    The impeller tool is the same on the Ultra 150, 15f and the 250.

    Take the two bolts out of the block on the top of the pump that has the 2 fittings on the sides of them, that way you dont have to take the clamps off the hoses, makes it a lil easier for me.

    When you got to put it back together, use windex on the big black gasket that goes into the pump shoe, it makes it slide in better.
    Last edited by Aquaholic6801; 02-27-2008 at 11:19 PM.

  4. #4
    JET250's Avatar
    Join Date
    Jan 2008
    Location
    Australia mate fair dinkum.
    Posts
    1,278
    +1
    2
    I'm looking at an impeller change as well, where can I get the tool from. thx.

  5. #5
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,994
    +1
    455
    Quote Originally Posted by JET250 View Post
    I'm looking at an impeller change as well, where can I get the tool from. thx.
    Get them from your dealer, www.impros.com, or search the web. I got mine from impros and the cost was under 20 bucks.

  6. #6
    madtown_chris's Avatar
    Join Date
    Oct 2007
    Location
    Madison, WI
    Posts
    182
    brings me to ask the question why the online store on this site doesn't carry it...????

  7. #7
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,446
    +1
    650
    Quote Originally Posted by madtown_chris View Post
    brings me to ask the question why the online store on this site doesn't carry it...????
    You can order OEM parts from the store, Im sure its in there some where.

  8. #8
    madtown_chris's Avatar
    Join Date
    Oct 2007
    Location
    Madison, WI
    Posts
    182
    Part # is Tool35 in Riva Book

  9. #9
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by madtown_chris View Post
    brings me to ask the question why the online store on this site doesn't carry it...????

    Hi Chris, i just added the tool to the store
    http://www.4-tecperformance.com/inde...oducts_id=1081

    If ever you guys are looking for a part and don't see it in the store by all means, please shoot me a PM and i'll get it added.

    Thanks guys!

  10. #10
    rhorne1053's Avatar
    Join Date
    Oct 2006
    Location
    Santee, S.C.
    Posts
    634
    Jason, I sent them the pump with the impeller in it. They reworked and returned to me with the pump installed in the pump.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. impellar removal
    By JAG1926 in forum Polaris Open Discussion
    Replies: 10
    Last Post: 03-21-2010, 03:16 PM
  2. Removal of Ride Plate and Pump Housing Trouble
    By jamesnb in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 09-14-2008, 09:32 PM
  3. WTB: Impellar Removal Tool
    By Sabu1984 in forum Polaris Classifieds
    Replies: 2
    Last Post: 05-18-2008, 09:32 PM
  4. impellar removal tool.
    By spaulding in forum Kawasaki PWC Performance (4-stroke)
    Replies: 1
    Last Post: 02-18-2008, 08:55 PM
  5. Impellar Removal (CONE)
    By brad2510 in forum 4-Tec Performance
    Replies: 33
    Last Post: 02-23-2006, 09:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •