02-29-2008, 02:24 PM #1
07 RXT stock- New impellor needed.
I ate some rocks late last season. I replaced the wear ring but still not getting the performance I should be getting. The ski blows out while coming out of the hole and a top speed of only 57mph. My question is which impellor should I buy for this? Bone stock...no mods.
Option #1- send in current impellor to get reworked
Option #2- Buy a new impellor (which one?)
Thank you for any helpful info here!
02-29-2008, 05:01 PM #2
What kind of shape was you impeller in? I have a stock one. If you are interested in it, PM me.
02-29-2008, 05:11 PM #3
02-29-2008, 05:18 PM #4
02-29-2008, 05:38 PM #5
02-29-2008, 08:00 PM #6
A 14/19 solas? Is this what I need? Sorry........I've been into snowmobiles lately.
02-29-2008, 08:06 PM #7
If you are still stock, with no mod's, I'd go with a Solas 14/17R or a stock impeller.
02-29-2008, 08:28 PM #8
03-01-2008, 08:08 AM #9
Last edited by driveumhard; 03-01-2008 at 08:09 AM. Reason: sp
03-01-2008, 09:48 AM #10
"You will not mod this ski."
Why the grate?
What kind of r's are you turning at wot?...depending on that answer...put in a 14/17r.
Is your ring stainless?
Have you swapped out your SC washers?
Point to all this....if you're not gonna mod for speed...mod for reliability...ie IC strainer, clutch washers, ss wear ring...ect.
There's a thread at the top somewhere about "bullet proofing your 4-tec".
Not a bad idea.
Last edited by VaRedneck; 03-01-2008 at 09:51 AM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Ricksraiders in forum Sea Doo Open DiscussionReplies: 20Last Post: 06-07-2014, 09:59 PM
By scooter37x in forum 4-Tec PerformanceReplies: 3Last Post: 05-21-2009, 08:40 PM
By 05Limited in forum Sea Doo Open DiscussionReplies: 6Last Post: 04-14-2006, 07:29 PM
By omelfata in forum Sea Doo Open DiscussionReplies: 35Last Post: 11-20-2005, 02:20 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 20Last Post: 08-03-2005, 10:23 AM