Results 1 to 3 of 3
  1. #1
    800AMSOIL4U's Avatar
    Join Date
    Aug 2006
    Location
    Morgan Hill, CA
    Posts
    5,024
    +1
    132

    AMSOIL/Injen New Cold Air Intake for GMC/FORD/Dodge 7.6%-14% more HP and Torque

    Intake System Design
    Cold air intake systems serve several important functions. Primarily, they are used to increase the amount of oxygen available to the engine, increasing power. Because cool air has greater density than hot air, aftermarket intakes improve combustion of fuel by capturing cooler air from outside the engine compartment. In addition, an aftermarket air intake system increases the diameter of the intake as compared to the original equipment, increasing air flow into the engine and making more oxygen available during the combustion process.
    By designing a more direct route for the air entering the engine, as well as a smoother interior surface for the intake, air resistance is reduced and air flow is increased. To protect the engine from damaging dirt, cold air intakes are also equipped with filters. Air intake systems can improve gas mileage and increase performance, and they also add a sleek, custom look to a vehicle.
    Construction of Injen/AMSOIL Diesel Air Intake Systems
    AMSOIL now offers the Injen/AMSOIL Power-Flow Diesel Air Intake series with revolutionary Variable Induction Technology. The new VI Technology process is a multipower air induction system that fills the plenum with air, giving added power on demand. The Power Box on the Diesel series is manufactured using a composite mix of glass-filled nylon and polypropylene designed for noticeably quiet operation. The Power Box was designed for advanced cooling efficiency and the ability to resist high temperatures. It will not distort, unlike other plastic components that lose their structural integrity over time. This ground-breaking material makes it possible for the integration of a built-in velocity stack that streamlines the air turbulence into the plenum air chamber by way of the multi-power induction system. Injen/AMSOIL Diesel Air Intake Systems are manufactured with aerospace alloy T6 aluminum, stainless steel clamps and tig-welded ports and brackets. They are dyno-tuned for peak performance and have a direct bolt in application, making installation quick and easy.
    AMSOIL Ea Air Filters and Injen
    The addition of AMSOIL Ea Air Filters to these high-quality intake systems ensures the ultimate in protection and performance. Injen recognized the unsurpassed quality of AMSOIL Ea Air Filters and sought partnership with AMSOIL in order to make the best product possible.
    AMSOIL designed, developed and manufactured special EaA Diesel Intake Filters for the system. AMSOIL Ea Diesel Intake Filters provide increased horsepower and torque, improved acceleration and fuel economy and maximum air flow. The high quality of the AMSOIL Ea Filter media offers long filter life because the filters can be cleaned and reused. Above all, Injen/AMSOIL Filters provide superior protection and maximum efficiency for engines.
    AMSOIL now offers Injen/AMSOIL Power-Flow Diesel Intake kits for the following applications:
    • 2005-2007 Chevy/GMC 6.6L Duramax (Installation Instructions 1MB PDF)
    • 2003-2007 Dodge Ram 2500, 3500, 5.9L Cummins (Installation Instructions 1.18MB PDF)
    • 2003-2007 Ford PowerStroke F250, F350, F450 (Installation Instructions 1.37MB PDF)

    Pricing info http://www.amsoil.com/redirect.cgi?z...orefront/injen
    2005-2007 Chevy/GMC 6.6L Duramax2003-2007 Ford PowerStroke F250, F350, F4502003-2007 Dodge Ram 2500, 3500, 5.9L Cummins
    * 10% Increase in Torque with Injen/AMSOIL Diesel Air Intake
    * 10% Increase in Horsepower with Injen/AMSOIL Diesel Air Intake

    * 7.6% Increase in Torque with Injen/AMSOIL Diesel Air Intake
    * 7.6% Increase in Horsepower with Injen/AMSOIL Diesel Air Intake

    * 14% Increase in Torque with Injen/AMSOIL Diesel Air Intake
    * 14% Increase in Horsepower with Injen/AMSOIL Diesel Air Intake
    *These results are representative of the vehicles tested in support of the development of the Injen/AMSOIL Cold Air Intakes. Performance may vary from vehicle to vehicle due to equipment and driving conditions.
    Last edited by 800AMSOIL4U; 02-29-2008 at 08:51 PM.


  2. #2
    The ski's have taken a "backseat" to the Corvette DarthAWM's Avatar
    Join Date
    Nov 2007
    Location
    Odessa, TX
    Posts
    5,364
    What do you have in a '05 Avalanche? And how much?

  3. #3
    800AMSOIL4U's Avatar
    Join Date
    Aug 2006
    Location
    Morgan Hill, CA
    Posts
    5,024
    +1
    132
    Quote Originally Posted by DarthAWM View Post
    What do you have in a '05 Avalanche? And how much?
    Right now they only have the cold air systems for the Diesels. Call me and I will tell you how to do it for FREE. I did one on my 2005 GMC Denali and on Ph2ocraft's 07 Avalanche.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New LTA air intakes for F-15X
    By Super Jim in forum Honda Performance
    Replies: 3
    Last Post: 07-07-2009, 08:26 PM
  2. Riva cold air intake for RXP or RXP-X
    By powertek in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 06-10-2008, 03:56 PM
  3. New Cold Air Intake for Diesel Trucks Ford, GM and Dodge
    By 800AMSOIL4U in forum Open Discussion
    Replies: 0
    Last Post: 01-25-2008, 08:47 PM
  4. Custom cold air intake for a Speedster 150
    By VX1 in forum Sea Doo Sport Boats
    Replies: 24
    Last Post: 04-13-2007, 01:57 PM
  5. New Cold Air Intake From K&N
    By Dr Len in forum 4-Tec Performance
    Replies: 4
    Last Post: 12-03-2006, 09:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •