Thread: MSX 140 crank
03-05-2008, 05:25 AM #1
MSX 140 crank
I was wondering if the 140 crank uses the same parts as the virage 1200 crank for a rebuild
03-05-2008, 01:54 PM #2
the msx crank has a snap ring around the one main bearing to keep the crank in place. to use a 1200 crank in the msx you must install the snap ring in the front of the crank(mag side) like the 1200's. so to sum it up you can use the msx crank in the 1200 if you take the snap ring off the one main bearing. to use a 1200 crank in the msx cases you must install the snap ring from a 1200 in the front of the case(mag side). the snap ring keeps the crank from walking. hope this helps.
P.S. If you need a crank we have them in stock rebuilt. Call for details.
03-05-2008, 07:05 PM #3
i have a msx 140 crank
it needs a rebuild
can the 1200 rebuild kits or parts individually used to rebuild the msx crank
thanks in advance
03-05-2008, 08:22 PM #4
yes you can use the 1200 rebuild kit. you just need to use the 1200 snap ring in the front.
03-06-2008, 06:37 PM #5
so you use the old ring or do you have to get them new
06-07-2008, 03:16 AM #6
- Join Date
- Jun 2008
- Bullhead City AZ.
Crankshafts and SHortBlocks
I had a guy build a crank for MSX140 what a Great job check out
06-07-2008, 07:48 AM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ATXMSX140 in forum MSX/MatrixReplies: 9Last Post: 06-29-2012, 12:15 AM
By K447 in forum Polaris ClassifiedsReplies: 20Last Post: 06-20-2012, 10:33 PM
By 1100zxi in forum Polaris Open DiscussionReplies: 5Last Post: 06-28-2011, 10:47 AM
By X-Cane in forum Sea Doo Open DiscussionReplies: 10Last Post: 04-23-2006, 11:12 AM