Results 1 to 5 of 5

Thread: Spring Question

  1. #1
    There is no VooDoo like BadVooDoo NeVerMind's Avatar
    Join Date
    Sep 2005
    Location
    Hammond, IN
    Posts
    413

    Spring Question

    I have a quick question.. What is the purpose and where does the spring go underneath the Stator cover?

    I am referring to part number 6 on page 5-34 of the service manual..


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    The end of the starter bendix goes into the hole where the spring is. Looking at the cover assemble washer, then spring, then washer and pack some grease in there so it will stay put.

  3. #3
    There is no VooDoo like BadVooDoo NeVerMind's Avatar
    Join Date
    Sep 2005
    Location
    Hammond, IN
    Posts
    413
    Quote Originally Posted by WFO View Post
    The end of the starter bendix goes into the hole where the spring is. Looking at the cover assemble washer, then spring, then washer and pack some grease in there so it will stay put.
    So this is attached to the Bendix? I bought a bendix, it doesn't have the spring so that means an order to boats.net.

  4. #4
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    I dont have a 1200 manual... so I assume you are refering to the spring in the stator cover.

    If you look at the stator cover, there is a boss made into the cover with a hole and bushing. It recieves the end of the bendix. The washer-spring-washer goes into the hole on the cover.

  5. #5
    There is no VooDoo like BadVooDoo NeVerMind's Avatar
    Join Date
    Sep 2005
    Location
    Hammond, IN
    Posts
    413
    WFO,

    I looked at my stator cover and I get it... Thanks for the help.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Valve spring question - Color codes on OEM springs?
    By boostaholic in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-31-2014, 12:01 PM
  2. Keihin Pop-off Spring Question
    By LaserLTV in forum Polaris PWC Performance
    Replies: 10
    Last Post: 01-28-2013, 06:39 PM
  3. removing carb return spring questions
    By fivespeedsteed in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-22-2012, 06:18 PM
  4. BOV Spring Question (TiAL)
    By o uncola o in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-28-2011, 11:00 AM
  5. Needle valve arm spring question
    By Slipknotanfitch9 in forum Polaris Open Discussion
    Replies: 5
    Last Post: 07-02-2010, 09:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •