Results 1 to 6 of 6
  1. #1

    Join Date
    Apr 2007
    Location
    Jacksonville, FL
    Posts
    756
    +1
    2

    need help with oil leak

    Im in the process of building a gprxp, and I noticed as I tried to start it, the oil was leaking out of the pto or where the driveshaft enters the motor. I was told that it could be leaking out of the ball bearing and bellow, which is 43-44. I have the black housing which I think is the bellow, but I dont have the bearing nor do I know what it looks like. If someone has a pic of the bearing, I would appreciate it.






  2. #2
    AKA: Larry lafjax's Avatar
    Join Date
    Jul 2006
    Location
    Jacksonville, Fl
    Posts
    3,032
    Quote Originally Posted by cliff0413 View Post
    Im in the process of building a gprxp, and I noticed as I tried to start it, the oil was leaking out of the pto or where the driveshaft enters the motor. I was told that it could be leaking out of the ball bearing and bellow, which is 43-44. I have the black housing which I think is the bellow, but I dont have the bearing nor do I know what it looks like. If someone has a pic of the bearing, I would appreciate it.

    http://greenhulk.net/forums/attachme...1&d=1204654111
    Cliff, parts 44 are the orings that seal the drive shaft, I think...I tried to find what the shaft plugs into but could not find it on the breakdowns. There is a bearing in the round part of the rubber flap with o-rings in it, I think. I need to replace my carbon ring so when I do it I can check it out and/or you can stop by and see it yourself.

  3. #3
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,625
    +1
    806
    Yes, there's a bearing there. It comes pre-greased from the factory.

  4. #4

    Join Date
    Apr 2007
    Location
    Jacksonville, FL
    Posts
    756
    +1
    2
    can you buy this bearing without buying the housing

  5. #5
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,625
    +1
    806
    look under magneto assy. and pto .. it's parts # 42 & 43. Says about $130.. I don't know if they'll seperate the bellow and bearing though. Or how you would install it either as I think it comes as one piece (mine did).

  6. #6
    AKA: Larry lafjax's Avatar
    Join Date
    Jul 2006
    Location
    Jacksonville, Fl
    Posts
    3,032
    Quote Originally Posted by JFizzleJR View Post
    look under magneto assy. and pto .. it's parts # 42 & 43. Says about $130.. I don't know if they'll seperate the bellow and bearing though. Or how you would install it either as I think it comes as one piece (mine did).
    Yep, that's it cliff...

    43420832648
    Ball Bearing With Bellows Includes 43 to 44

    The bearing is under the clamp...I wonder what happened to the one you had off the rxp?

    You can look it up here:
    BRP Parts : Find every BRP Parts in our parts catalog - BRP USA

    Good call, James!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. need help guys oil leak
    By AdrianRXT in forum 4-Tec Performance
    Replies: 23
    Last Post: 02-15-2010, 04:56 PM
  2. Noob, needs help with oil.
    By Black_Bart in forum Kawasaki PWC Performance (4-stroke)
    Replies: 9
    Last Post: 07-31-2007, 07:32 PM
  3. need help with oil injection block off 2006 gp1300rs
    By MJE in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-06-2007, 11:34 AM
  4. Need Help GP1200R Oil Leak
    By Chris11764 in forum Yamaha Open Discussion
    Replies: 6
    Last Post: 05-23-2007, 07:16 AM
  5. NEED HELP! with oil pressure problem!...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 55
    Last Post: 11-21-2006, 05:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •