Results 1 to 6 of 6

Thread: Gp1200r 01'

  1. #1
    Ramps's Avatar
    Join Date
    Jan 2008
    Location
    Myakka, FL
    Posts
    647
    +1
    28

    Exclamation Gp1200r 01'

    What is the best way to clean my power valves without taking the head off? What type of cleaner, etc...And what should I look for as far as damage?


  2. #2
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Quote Originally Posted by Ramps View Post
    What is the best way to clean my power valves without taking the head off? What type of cleaner, etc...And what should I look for as far as damage?
    You can pull them without pulling the head. down load the manual it will walk you through it. pretty easy actually. Upgrade to waveater clips if you haven't already.

  3. #3
    Ramps's Avatar
    Join Date
    Jan 2008
    Location
    Myakka, FL
    Posts
    647
    +1
    28

    PV's

    Quote Originally Posted by OsideBill View Post
    You can pull them without pulling the head. down load the manual it will walk you through it. pretty easy actually. Upgrade to waveater clips if you haven't already.
    Thank you Bill. Get well soon......

  4. #4
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Thanks the worst is past me. I was lucky it could have been worse. I ended up in wrist braces, no casts So I can at least do some work and make a few bucks

  5. #5
    There is no VooDoo like BadVooDoo NeVerMind's Avatar
    Join Date
    Sep 2005
    Location
    Hammond, IN
    Posts
    413
    Use MIneral spirits to clean up the carbon and oil... Not too much as to spill down into the motor. I just cleaned mine and they were bad. I'd reccomend lubing everythig up with 2 cycle oil when you place them back in.

  6. #6
    Ramps's Avatar
    Join Date
    Jan 2008
    Location
    Myakka, FL
    Posts
    647
    +1
    28

    Thumbs up

    Quote Originally Posted by NeVerMind View Post
    Use MIneral spirits to clean up the carbon and oil... Not too much as to spill down into the motor. I just cleaned mine and they were bad. I'd reccomend lubing everythig up with 2 cycle oil when you place them back in.
    Thanks nevermind

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB Power Valve Motor for GP1200r 01
    By chris1200 in forum Yamaha Classifieds
    Replies: 1
    Last Post: 06-05-2009, 04:39 PM
  2. Rejetted Carbs GP1200R 01' Need Help
    By Ramps in forum Yamaha PWC Performance (2-stroke)
    Replies: 40
    Last Post: 01-27-2008, 10:38 PM
  3. well looks like I may need a set of cases 01 GP1200R
    By whiteyz in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 09-03-2007, 09:59 PM
  4. 01 gp1200r w/blown motor on ebay
    By KamikazeGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 04-26-2007, 09:13 PM
  5. stage 2 01 GP1200R issue
    By ou812 in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 07-29-2006, 11:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •