Results 1 to 8 of 8
  1. #1

    Join Date
    Jun 2005
    Location
    Schaumburg, IL
    Posts
    20

    pump support replacement

    Has anyone ever replaced the pump support assembly on the RXP
    Any tricks on getting this removed from the hull?
    Most of the vain were damaged from my son sucking up a rock.

    Thanks for any of your help


  2. #2
    i just did one today . do you have access to explosives or a chainsaw?

  3. #3

    Join Date
    Jun 2005
    Location
    Schaumburg, IL
    Posts
    20
    Mark,
    I don't trust the dealers in my area to do the job right So I would like to have so insight on how you got the support off I have already taken the ride plate and everything off. Anybody have any ideas other than the chainsaw method

  4. #4

    pump support replacement

    Rock ingestion broke my RXP pump housing vanes. I replaced the impeller and wear ring and filed down the broken vanes. I have not yet been able to GPS the RXP in calm water, but it seems to run fine without the vanes.

  5. #5

    Join Date
    Jun 2005
    Location
    Schaumburg, IL
    Posts
    20
    jpwt62,
    I did the samething, but the problem I'm having now is it cavitates out of the hole which is driving me crazy. I think it needs to be replaced.

  6. #6

    pump housing

    RXP with new ring and impeller w/ broken filed down pump support now revs like heck but wont' pull out of the hole. I just ordered the new jet pump support.

  7. #7

    Join Date
    Apr 2005
    Location
    Elysian Fields,Tx
    Posts
    358
    You can send those pumps to Impros and Dave can repair those broken vanes to like new for about $130.

  8. #8

    jet pump support

    Are you talking about the aluminum jet pump housing? I'm talking about the jet pump support that is glued to the hull. Its plastic, a new one costs about $120

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replacing the pump support on 4tec
    By JeffSki in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 11-14-2012, 03:48 PM
  2. (Damaged) Pump Support Question
    By Snoman in forum 4-Tec Performance
    Replies: 6
    Last Post: 04-13-2006, 06:37 AM
  3. Time for a new pump support
    By Mark S in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-11-2006, 10:46 PM
  4. do pump support fins have any purpose
    By macattack in forum 4-Tec Performance
    Replies: 17
    Last Post: 07-10-2005, 09:56 PM
  5. Are sharks plastic fins in the pump support needed
    By macattack in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-04-2005, 11:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •