Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1
    WE DONT DIAL 911 RDH's Avatar
    Join Date
    Jan 2007
    Location
    LAKE TRAVIS
    Posts
    1,862

    Question Electrical Box Problems!!

    ok i just got finished installing triple pipes,,

    when i hit the starter it doesnt turn over at all, theres a weird noise coming from the box, if you put your hand on it you can feel it move, i opened it up and tryed to start again, it sounds like a silenoid is bad, i really dont know.....

    last time it worked great when i had my single pipe on, since triples i havent changed anything in the box except the new curves from advent

    ive tryed three fully charged batteries,,,,,,,,so its not the battery..
    ive tryed different cdi's,,,,,,,so its not the ignition..
    ive checked all the fuses and there good....

    what now??


  2. #2
    DAGO RACING CREW 97GPSLEEPER's Avatar
    Join Date
    Apr 2006
    Location
    Orange, TX
    Posts
    4,228
    +1
    169
    starter relay?

  3. #3
    WE DONT DIAL 911 RDH's Avatar
    Join Date
    Jan 2007
    Location
    LAKE TRAVIS
    Posts
    1,862
    is there a moving part in the starter relay? i can feel movement, i didnt think there were any moving parts in the box..

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Check the grounds..

  5. #5
    DAGO RACING CREW 97GPSLEEPER's Avatar
    Join Date
    Apr 2006
    Location
    Orange, TX
    Posts
    4,228
    +1
    169
    Like beerdart said it may be a ground.

  6. #6
    WE DONT DIAL 911 RDH's Avatar
    Join Date
    Jan 2007
    Location
    LAKE TRAVIS
    Posts
    1,862
    Quote Originally Posted by beerdart View Post
    Check the grounds..

    to the starter? everythings good.

    stator is plugged in on the box,, its grounded to the powervalve cap...

  7. #7
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    -Will the engine turn by hand ?
    -Supply a seperate ground from the battery to the engine (jumper cables) and try.
    -Are you getting power to the starter in crank mode ?
    -If yes, how much voltage ?
    -Put a stock CDI in and try it ?
    -Double check all the connectors in the front to make sure they are plugged in to the correct connector.

  8. #8
    WE DONT DIAL 911 RDH's Avatar
    Join Date
    Jan 2007
    Location
    LAKE TRAVIS
    Posts
    1,862
    Quote Originally Posted by WFO View Post
    -Will the engine turn by hand ?yes
    -Supply a seperate ground from the battery to the engine (jumper cables) and try.will do tonight
    -Are you getting power to the starter in crank mode ? no power at all to the starter
    -If yes, how much voltage ?
    -Put a stock CDI in and try it ?tryed it, nothing different.
    -Double check all the connectors in the front to make sure they are plugged in to the correct connector.will do tonight
    .

  9. #9
    MPower's Avatar
    Join Date
    May 2005
    Location
    Raleigh, NC
    Posts
    3,340
    +1
    121
    I was going to say battery because I had the exact same problem one time. There was a terrible noise from the electrical box, loud buzzing. The battery was fully charged but it ended up the battery just went bad. If you have tried 3 different batteries that probably isn't it though.

    I tried new starter, new starter relay, fuses, CDI, went over all connections. It was the battery.

    Try cleaning the ends of your battery connectors with a wire brush.

  10. #10
    WE DONT DIAL 911 RDH's Avatar
    Join Date
    Jan 2007
    Location
    LAKE TRAVIS
    Posts
    1,862
    Quote Originally Posted by WFO View Post
    -Will the engine turn by hand ?
    -Supply a seperate ground from the battery to the engine (jumper cables) and try.
    -Are you getting power to the starter in crank mode ?
    -If yes, how much voltage ?
    -Put a stock CDI in and try it ?
    -Double check all the connectors in the front to make sure they are plugged in to the correct connector.

    ok tryed the jumper cable for a ground from the front exhaust bracket on the case, to the battery negative... nothing different

    checked all the plugs in the front, all are good and tight except ive unplugged the buzzer power, always had it unplugged..

    im going down now to swap out my starter relay. with the other ski

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. electrical Black box problem
    By nmbr1sarge in forum Polaris Tech Tips and Info
    Replies: 7
    Last Post: 09-17-2013, 02:04 PM
  2. Electrical box problems
    By My95GTX in forum 2-Stroke Performance
    Replies: 1
    Last Post: 06-29-2009, 10:21 PM
  3. yamaha waverunner 760xl , electrical box!!problem??
    By spetna in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 05-09-2009, 02:09 PM
  4. New problem!! Buzzing from electrical box/no start
    By 95SLT750PWC in forum Polaris Open Discussion
    Replies: 10
    Last Post: 06-23-2007, 12:30 AM
  5. Want To Re Mount Electrical Box GP1200R
    By Mik72e in forum Yamaha How To & FAQs
    Replies: 4
    Last Post: 09-21-2006, 06:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •