Results 1 to 7 of 7
  1. #1

    Modify cooling system

    I want to clean up the stock 92 water routing! what if I eliminate item 1
    just loop or plug the block for #6 were it comes out of the block and tie all of the pisser lines at 35 together and dump them into the inlet path from the pump pick up?? below is my 92 and lower is a more modern 95 thx Z










  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    I would update to the 95 routing and leave the pisser on the exhaust.

  3. #3
    I was going to leave the pisser but I meant the 92 exhaust has three outlet tubes at 1/4 inch that feed the little isolated manifold so I was curious what to do with them? Thanks! Z

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Those would need to be tied into a tee to the water from the pump.

  5. #5
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Or maybe cap them and run it like 1993??


  6. #6
    thanks!! Z

  7. #7

    Join Date
    May 2008
    Location
    North Dakota
    Posts
    32
    Quote Originally Posted by ZMANN View Post
    I want to clean up the stock 92 water routing! what if I eliminate item 1
    just loop or plug the block for #6 were it comes out of the block and tie all of the pisser lines at 35 together and dump them into the inlet path from the pump pick up?? below is my 92 and lower is a more modern 95 thx Z








    ZMANN,
    Could you share on how you finally ran the cooling system on your 92? I've just recently got a 92 sl650 and I'm running into a problem where the cooling system doesn't match what is on the 92 cooling diagram. The previous owner must have made some modifications but not sure if it was done correctly. You can send me a pm if you have info to share. Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. closed vs open loop cooling system
    By Tiplickhahaha in forum 4-Tec Performance
    Replies: 31
    Last Post: 03-08-2015, 10:53 AM
  2. Cooling system ?
    By mattman in forum Polaris PWC Performance
    Replies: 6
    Last Post: 04-22-2007, 01:11 PM
  3. Cooling system vent hose?
    By RVRM in forum 4-Tec Performance
    Replies: 4
    Last Post: 01-03-2007, 07:09 PM
  4. 05 GTX 4tec SC Cooling System Issue
    By jetworx hawaii in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 05-28-2006, 01:18 PM
  5. Hulk, Flushing Closed-Loop cooling system
    By Red Devil in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-12-2005, 09:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •