Thread: Crankcase breather kit
03-18-2008, 07:17 AM #1
Crankcase breather kit
i put the kit on this past weekend..wasn't to bad..just took my time..i haven't tested it yet so i'll let you guys know what i find out..supposed to go ride this weekend..btw anyone installing this kit better have the 12mm offset wrench..thanks to the others for the heads up
03-18-2008, 07:46 AM #2
Was the vent tube on the crankcase blocked with silicone?
03-18-2008, 08:45 AM #3
03-18-2008, 09:11 AM #4
- Join Date
- Jan 2007
On the first ski I have apart I had very little blockage.
03-18-2008, 11:28 AM #5
i had very little blockage..i can't wait for a test ride
03-18-2008, 05:00 PM #6
Finished mine a couple weeks ago and I had not one trace of silicone anywhere. Kit went on good and I hope it works throughout the summer.
03-18-2008, 06:45 PM #7
Kawi must have hired a new silicone dude.
I bought my 250X last March and my tube was almost totally blocked.
03-18-2008, 07:02 PM #8
my tube had alittle silicone that ran down inside..not much but enough to make a difference especially with the casting flaw blocking 20% of the tube..i ran bloth hoses since my GIO was so severe..one thing i want to add is i think r&d changed to piggy back can some..my can doesn't have the port that is half way down the can..
03-18-2008, 07:03 PM #9
03-18-2008, 07:05 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Beagleman62 in forum Kawasaki PWC Performance (4-stroke)Replies: 37Last Post: 11-14-2007, 01:11 AM
By meirvin in forum 4-Tec PerformanceReplies: 3Last Post: 10-27-2006, 08:29 AM
By Kinchyle in forum 4-Tec PerformanceReplies: 3Last Post: 09-15-2005, 10:12 PM
By Kinchyle in forum 4-Tec PerformanceReplies: 3Last Post: 07-30-2005, 12:10 AM
By Jarrett in forum 4-Tec PerformanceReplies: 14Last Post: 07-06-2005, 09:05 AM