03-19-2008, 08:04 PM #1
Anyone know if this place is still open??? I've emailed them a couple times regarding an auto-trim nozzle for the RXT that they sell, or once sold. No reply yet, I've resent the email, albeit 3 months ago, and still have not heard back.
03-19-2008, 08:22 PM #2
Yes, they are open. I sell their auto trims almost every day.
Here is the auto trim
You can even save 10% off of all the R&D products from shopping in this sites online store. The coupon code is greenhulk
03-19-2008, 08:37 PM #3
Thanks Jerry, will that work with the RXT though? I'm inexperienced when it comes to pump trim stuff, I did notice that the parts number they listed through their website was different :163-95003.
If either would work, I would prefer to buy through you, thanks for the help. I want to put a 2.5 degree wedge on my RXT with an auto-trim so I can get negative trim in corners.
03-19-2008, 09:03 PM #4
Good question! I will have an answer for you in the morning.
03-20-2008, 05:12 PM #5
03-20-2008, 05:44 PM #6
none, my email has been ignored for 20 hours now
03-20-2008, 05:47 PM #7
- Join Date
- Nov 2007
- Odessa, TX
03-20-2008, 05:50 PM #8
you need a RXP venturi and it'll work... or you can drill and tap the bosses on the rxt venturi.
your problem is that you need something to mount the trim ring to that comes with the auto-trim... the RXT doesn't have a trim ring usually, so if you got a RXP venturi which is already drilled for it, then it will work no problem
on the RXP, you can override the auto-trim by still using the VTS... with a RXT, you wont have that override ability, it'll be strictly manual adjustments.
hope this helps, but yes you can make it work, but u need to be able to bolt the trim ring in place
03-20-2008, 05:53 PM #9
thanks for the info shibby
03-20-2008, 05:58 PM #10
and i just also wanted to add, i dont believe they send a trim ring with it.. 99% sure they dont.
so you would need a RXP venturi AND a rxp trim ring...
then it would work... essentially you manually adjust where you want the nozzle to be when going straight, and then you can adjust how far down you want the nozzle to drop when you turn the bars.
on a RXP model that has electronic trim, they make a VTS rod thingy, so that you can electronically change where that nuetral position is all the time and change the effect of the auto-drop kidn of like stock... that's the feature you would not be getting with an RXT...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ph2ocraft in forum Polaris Open DiscussionReplies: 20Last Post: 06-25-2008, 05:58 AM
By picaflor in forum Yamaha How To & FAQsReplies: 8Last Post: 05-18-2007, 01:02 AM
By Water4fire in forum Sea Doo Open DiscussionReplies: 20Last Post: 12-27-2006, 05:01 PM
By Totallyblown in forum 4-Tec PerformanceReplies: 47Last Post: 04-03-2006, 08:35 PM
By CrazyA in forum 4-Tec PerformanceReplies: 7Last Post: 03-08-2006, 03:04 AM