Thread: Adjustment for BOV
03-22-2008, 12:11 AM #1
Adjustment for BOV
How many turns in were you guys doing on the BOV ,as im curious as mine is leaking a bit and i dont want to block it off yet. thanks
Last edited by Kiwi Racer; 03-22-2008 at 12:13 AM. Reason: spelling error
03-22-2008, 12:29 AM #2
OK, you've lured me in on this one....i'll try to be cool.
The short answer is all of them are different - number of turns WILL NOT get you there. This is barking up the wrong tree big time.
I will tell you I feel very strongly on this next bit, and is a perfect application that is highly reccomended. Apply Fluid Film to the inside of your Stock BOV to prevent corrosion and help with operation consistancy....I would not spray or apply any other corrosion preventive or lubricant besides Fluid Film here. All 250X owners should PM Dano50 to get a free sample to apply in this application alone.
There is going to be some info on this posted in the next week or so i figure.
By the way, how did you establish it was leaking?
03-22-2008, 02:08 AM #3
I was thinking maybe one full turn would = 1lbs or what ?,,,but thanks for your input.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By fasted1500 in forum Sea Doo ClassifiedsReplies: 1Last Post: 08-19-2008, 07:36 PM
By GDM in forum Kawasaki PWC Performance (4-stroke)Replies: 42Last Post: 07-06-2007, 03:13 PM
By mooneyb91084 in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 04-14-2007, 03:25 PM
By excess in forum 4-Tec PerformanceReplies: 4Last Post: 08-16-2006, 07:03 PM
By ABBOTT in forum Yamaha How To & FAQsReplies: 0Last Post: 02-23-2006, 12:33 AM