03-22-2008, 07:23 PM #1
How to fire gp1200 with no gauges?
I'm trying to start a gp1200 with stock electrics and no gauges. I'm sure the code lock is engaged. How do i bypass this as i dont intend to ever run gauges on this ski. Thanks, Tom
03-23-2008, 07:43 AM #2
- Join Date
- Aug 2006
The code is part of the gage not the cdi so you should be fine not having it
03-23-2008, 09:17 AM #3
I have an SUV service manual same motor and electrical system as the GP 1200. It shows that the red wire from the start stop switch goes in then out of the gauge then to the relay via the fuse. Run this wire direct to the fuse and you should be fine.
03-23-2008, 09:19 AM #4
just look up the wiring for a raider 1100. it had the same exact wiring, but without the security thing.
03-23-2008, 09:19 AM #5
sorry, made a post before reading the others.
thanks for the info. Tom
Last edited by superramjet; 03-23-2008 at 09:29 AM. Reason: didn't read all posts
03-23-2008, 09:35 AM #6
03-23-2008, 11:41 AM #7
wow, that's the most useful link i've ever come across. Thanks Greenhulk and everyone involved for hosting these manuals.
thanks again. Tom
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By uziwork in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 08-21-2007, 07:44 PM
By FL03GTX in forum 4-Tec PerformanceReplies: 0Last Post: 08-20-2007, 03:00 PM
By FL03GTX in forum 4-Tec PerformanceReplies: 1Last Post: 08-20-2007, 02:26 PM
By somefun in forum 4-Tec PerformanceReplies: 5Last Post: 04-19-2007, 07:34 PM
By CarFanatic in forum Sea Doo Open DiscussionReplies: 11Last Post: 06-21-2006, 10:45 PM