Thread: UMI adjustment
06-01-2006, 08:28 PM #1
Guys are yall's UMI steering systems real easy to turn? LIKE to easy. I feel either I have to adjust something or look for a steering damper to put on it.
Also what hole did yall use to connect the cable. i don't feel I am getting the nozzle to turn all the way in both directions.
06-01-2006, 08:51 PM #2
I ended up in the middle hole...
Mine feels almost too smooth as well but I've tested it time and time again to make sure it does in fact turn lock to lock at the nozzle...
06-01-2006, 08:54 PM #3
Austin!! call me!!! \/
my cell # is in ur PM inbox
06-01-2006, 09:03 PM #4
the 3 holes are there to adjust steering agressivness....so I think on its most agressive setting (what I have it on) you barely have to turn the bars a full turn...to turn sharply...
06-01-2006, 11:16 PM #5
Two2: So you used the one at the end of the brackett?
So it is easy to move. I am gonna see what I can do about a damper system for it. Call UMI first ofcoarse.
Mine just doesn't feel as if it is turning all the way. Left to right!
I feel it is not sharp enough.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mstennes in forum 4-Tec PerformanceReplies: 9Last Post: 05-21-2009, 12:04 AM
By grantuk in forum 4-Tec PerformanceReplies: 9Last Post: 02-21-2008, 04:39 PM
By 303RXP in forum 4-Tec PerformanceReplies: 2Last Post: 06-13-2007, 08:27 PM
By jetskr in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 01-27-2006, 04:06 PM
By 1FastTrespiper in forum 4-Tec PerformanceReplies: 12Last Post: 06-18-2005, 08:33 PM